SPONSORS
2024 ICRBE EXPO |
Results 31 - 60 of 276
9 years ago
Steve Hartzell
32. Pheasant Rod
This is my first attempt and doing a feather inlay and I'm pretty pleased with the result. Also had a great time on the Pheasant hunt.
Forum: rodboard 10 years ago
Steve Hartzell
34. Phenix Grips
This is how I do it. Start with a Stanley Surform rasp to get the basic shape, follow with SiC sanding screen to take out the roughness, then sand with 150, 320, and 600 to finish. A 220 and 400 sandpaper may also be used if necessary. All this is done on the rod lathe. I have the shop vac underneath and it gets the vast majority of the cuttings and dust. I do a lot of detailed blowing, clean
Forum: rodboard 10 years ago
Steve Hartzell
39. Four Rods
These are my first attempts at Tiger Wraps. Made these rods for my favorite fishing buds. all on the same MHX blanks. The colors are different but otherwise all is the same.
Forum: rodboard 10 years ago
Steve Hartzell
45. CP comparison
I wrapped three section of Gudebrod nylon thread on my test wrap rod. The wrap on the left had two coats of Cason's Crystal Clear. The one in the middle had two coats of Flex Coat, and the one on the right had no CP. For my application the Flex worked the best.
Forum: rodboard 11 years ago
Steve Hartzell
My Grandfathers rod wrapper attached to my more modern power wrapper. Recently found in his fishing equipment. I remember him repairing rods with this when I was a wee lad. That was about 50 years ago.
Forum: rodboard 11 years ago
Steve Hartzell
60. Old Wrapper 1
An old wrapper found in my Grandfathers fishing equipment.
Forum: rodboard |