SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 273
12 years ago
Bill Ballou
Still have to ream out and sand caps down more. Random madness
Forum: rodboard 12 years ago
Bill Ballou
This goes with random grip. Made plug and hade to drill out1/2" to fit.Airbrushed colors and still have to epoxy to finish.
Forum: rodboard 5 years ago
Bill Ballou
one of the reason production rods don't use cp they are using a lot of black thread
Forum: rodboard 8 years ago
Bill Ballou
Ba, what I have been using on red cedar which i get from Archie is envirotex Lite. 2 part 1 to 1 mix. It is the finish that plug builders in the east use as finish and also used on bar tops. The finish is crystal clear hard and has good uv protectiuon. Can buy it at Hobby Lobby and if you have a smart phone they once a week have 40% off. Will try to send you some photos.
Bill
If you go to phot
Forum: rodboard 8 years ago
Bill Ballou
I should have stated that these will be at my booth at the ICRBE. Custom Fish Grips-split grips airbrushed and epoxied. I thought that a couple of fly handles might be of interest. By the responses I think I will make full wells in down locking. Probably with a rainbow trout theme. This piece should weigh 1 1/2 oz. Thanks again
Forum: rodboard 8 years ago
Bill Ballou
Making some up locking fly grips. 2 parts ! how wide should the insert hole be? 2 How deep? I hope many of the reel seats are close in size. I realize that the down locking seat the end can be flat. Thanks for any help. Bill
Forum: rodboard 8 years ago
Bill Ballou
Roger. is right on. Drill a 5/32 hole in the cap of each. Syringe should fit snug. always have syringe pulled half way out with air. when ready turn bottle upside down and depress syringe. This will push the air out. Now draw the amount needed. Hands never touch epoxy.
Forum: rodboard 9 years ago
Bill Ballou
Have done a few for customer. Mine are painted after turning. He wanted 1/4" bore and 7" long. Using red cedar cut 2 pieces drilled and glued up.. Like Phil use collet chuck and live Jacobs chuck on tail stock 1/4" stock for mandrel.. Personally I would rather the bore be a little larger and use tape for arbors. Trying to dill after shaping as mentioned can be a waste of time
Forum: rodboard 9 years ago
Bill Ballou
Frank, I make split grips that have a fish detail. one posted on The Nerbs site . If you hit members and my name there should be others there also. Feel free to email me for further information.
Forum: rodboard 9 years ago
Bill Ballou
Frank, I make split grips that have a fish detail. one posted on The Nerbs site . If you hit members and my name there should be others there also. Feel free to email me for further information.
Forum: rodboard 9 years ago
Bill Ballou
Frank, I make split grips that have a fish detail. one posted on The Nerbs site . If you hit members and my name there should be others there also. Feel free to email me for further information.
Forum: rodboard 9 years ago
Bill Ballou
The Coats and Clark Trilobal polyester works well as with Mettler polyester
Forum: rodboard 9 years ago
Bill Ballou
The Coats and Clark Trilobal polyester works well as with Mettler polyester
Forum: rodboard 9 years ago
Bill Ballou
78. live bait blank
Need some help. looking for a 7' live bait blank fast tip, heavy. Targeting stripers 30+. Probably use 60lb braid. What I've found seems to be E glass and large butt and at least 10oz. any other options? thanks Bill
Forum: rodboard 10 years ago
Bill Ballou
79. Re: TN gathering
John,
If you are going to have a gathering make a new and different title for post. The reason is this post will get pushed back pages and people won't find the time or place.
Bill
Forum: rodboard 10 years ago
Bill Ballou
80. Re: TN gathering
Depending on the date I would like to attend. Have built some rods and grips.
Bill
Forum: rodboard 10 years ago
Bill Ballou
Have done it with ls supreme because the high build was for me too hard to work with. Obviously it gives you a mediun cosistancy. Make sure that you use the same amount of a@ b of each. Should be fine
Forum: rodboard 10 years ago
Bill Ballou
I was fortunate to meet Col at the ICRBE 2012. An outstanding gentelman with a passion for rodbuilding and helping others.
My condolences to his family and I know that he is smiling down on us.
Bill Ballou
NERBS
Forum: rodboard 10 years ago
Bill Ballou
2X what Fred said. Most rod building syringes if you drill a 5/32 hole in the top of A & B in sert plunger. When you are finished with that bottle of finish just screw the cap with plunger on new and done.
Forum: rodboard 10 years ago
Bill Ballou
John, thank you for the kind compliments. This project has been a trial and error. Finally have some of the kinks straightened out.
Your work on the Brown trout is exceptional. Very crisp clean colors and has given me some inspiration to start one soon.
Keep up the good work and post.
Forum: rodboard 10 years ago
Bill Ballou
I have mixed equal parts of high and low build both a &b. It is a thinner mixture than the heavy high build with the same properties. I think!! Worked ok with alittle more pot life.
Forum: rodboard 10 years ago
Bill Ballou
First I want to thank you for undertaking white a task. It is important that younger people learn rod building. It's funny that one person from this class could be a world class builder-never know.
Thanks again-many great ideas above
Bill
Forum: rodboard 10 years ago
Bill Ballou
Tom is on the right track oooo steel wool will nock the shine off.
Forum: rodboard 10 years ago
Bill Ballou
Put a picture of spalded tamarind on aero reel seat. It is Photos then grips
Forum: rodboard 10 years ago
Bill Ballou
89. Re: Mike Barkey
Great man willing to share his wealth of information. Met him cpl times at ICRBE and gave me some good info on a lathe. The rod building community won't be the same. I feel honored to have met him.
Our time is not a dress rehersal. So make sure that you live everyday to the fullest
Forum: rodboard 10 years ago
Bill Ballou
Sounds great Dan. Would attend but Tn is hosting Auburn that day.
In process of making more split grips. Just finished rainbow trout.
Have to work on Mark for W.S.
Forum: rodboard |