SPONSORS
2024 ICRBE EXPO |
Results 31 - 60 of 108
10 years ago
corky fleming
Thank you for all of the suggestion. I will be looking into them.
Forum: rodboard 10 years ago
corky fleming
Looking for some Pro Football decals. Would like to find one to fit a trout /red fish rod in the Washington Redskins. Thanks in advance.
Forum: rodboard 10 years ago
corky fleming
I would try using ice and getting the ferrule cold the seat in a chair and put the rod behind your legs and reach your arms around the out side of your legs. Then try spreading your legs apart as you pull on the rod.
Forum: rodboard 10 years ago
corky fleming
Thank You Col. I am working on a tension device somewhat like it and I am having trouble with the spool flopping when it rotates.Not sure how to correct it.
Forum: rodboard 10 years ago
corky fleming
Hi Col,
I was looking at your picture of the tread tensioner and notice that you are using Mederia thread. Would you please advise what size bolts you are using and there appear to be something behind the washers at the bottom of the bolt and something between the washer on top of the thread spool and the washer on the bottom of the spring
Forum: rodboard 10 years ago
corky fleming
38. Re: Photos
Tom I am blind I am unable to find it on my log in either.
Forum: rodboard 10 years ago
corky fleming
39. Re: rod bags
In making the spinning and casting rod bag what material do you find best to use for the bag?
Forum: rodboard 10 years ago
corky fleming
40. Re: 2014 Expo
Looking forward to attending. I look forward to this event each year starting on Sunday morning before I leave the current years event. THANKS Tom for a great and wonderful week end.
Forum: rodboard 11 years ago
corky fleming
I enjoyed listen to Gary anytime that he tells his story. Thanks for the you tube site. I did have one problem and that is with you tube. the ads from the right side of screen keep breaking in. Being hard of hearing I would miss some of what Gary was saying.
Again Roger thanks for the site.
Forum: rodboard 11 years ago
corky fleming
I too having trouble with this concept. However I have not been able to sit down with the book and wrap as I read. I am sure there will be a big learning curve when I can do this. Thanks Billy for the information.
Forum: rodboard 11 years ago
corky fleming
Thanks Tom
I have the same comments as thad. Again thanks for the great show.
Forum: rodboard 11 years ago
corky fleming
Is it a Mildrum or Tycoon Finor guide. Once I see the picture I will try and id it for you. You can e-mail it to me also at flem109@comcast.net
Forum: rodboard 11 years ago
corky fleming
Thank you for the suggestions. I am meeting with my customer tomorrow and will give him the information+
Forum: rodboard 11 years ago
corky fleming
Looking for a glass blank to fish for sheephead with a fast taper in the 7 foot range. This will be used around pilings and structure so I would need a blank to have a good backbone. Would appreciate any suggestions.
Forum: rodboard 11 years ago
corky fleming
Hi Terry or Matt, If you don't mind would you please send me the a copy of the expanded Forhan security wrap tutorial. My email should be unlock.
Thanks
Corky
Forum: rodboard 11 years ago
corky fleming
There is a company that makes this type of rod. It is located just below Jacksonville, FL If you want the web address just e mail me and I will be happy to forward it to you.
Tom, I hope the post is not against the forum rules.
Forum: rodboard 11 years ago
corky fleming
Question: The first coat of finish on which you apply the color drops. Do you add the color while this finish is still wet or do you need to let it dry before adding the color?
Forum: rodboard 11 years ago
corky fleming
Thank you Roger for your e mail. I have ordered some today.
Forum: rodboard 11 years ago
corky fleming
Roger; I have searched the web and have not been able to find the .05 inch elastic bands that you mentioned in your post. If you would be so kind as to forward me a web site so I may find these I would be great full.
Thanks
Forum: rodboard 11 years ago
corky fleming
Tom; one one of the post I read that you had a CD with the old issue of RodMaker Mag. Can you please advise if this is so and where we can purchase the CD.
Thanks
Forum: rodboard 11 years ago
corky fleming
Good Morning, I am in Savannah, GA and would also like to get with some people with Rod Building. Maybe we can get a group together and meet at least once a quarter. Will be looking forward to hearing from some. My e mail should not be hidden.
Forum: rodboard 11 years ago
corky fleming
When I started back building rods I went upstairs and stold my wife's embroidery thread. It was a no brainer for me. Just glad it worked out the way it did.
Forum: rodboard 11 years ago
corky fleming
Woody if you don't mind would you please send me the web site for the reel tone. flem109@comcast.net THANKS
Forum: rodboard 11 years ago
corky fleming
Hey John; I am still very low on the learning curve. I feel very inadequate when talking with those who have done so much for the custom rod building. I hope to get up to speed and be able to contribute to this craft of rod building.
As for what I would like to see is the new ideas that have come about and sometime a general idea for how to begin. This is usually followed up by an article in Ro
Forum: rodboard 11 years ago
corky fleming
Col. I am glad that you will make it to the expo this year. I would love to meet you while you are there. I to would like to know where Billy and his group will be meeting. Always great discussion group to be in on.
Forum: rodboard |