SPONSORS
2024 ICRBE EXPO |
2014 Expo
Posted by:
Tom Kirkman
(Moderator)
Date: May 28, 2013 03:18PM
The 2014 International Custom Rod Building Exposition will be held on February 22nd and 23rd, 2014, in Winston-Salem, NC at the MC Benton Convention Center. There have been some behind the scene changes but these will not be apparent to either vendors or attendees.
Please note that the 2014 RodMaker Reception will be held on Saturday evening, the 22nd. Special hotel rates have been negotiated but they are not yet accepting reservations at those rates. The Expo website will be updated to reflect all aspects of the 2014 event around mid-June. ............... Edited 1 time(s). Last edit at 05/29/2013 07:02AM by Tom Kirkman. Re: 2014 Expo
Posted by:
Lou Auret
(204.16.161.---)
Date: May 28, 2013 03:50PM
Great news, with the change of venue my wife actually looks forward to going now. Re: 2014 Expo
Posted by:
Don Morse
(---.dhcp.aldl.mi.charter.com)
Date: May 28, 2013 04:31PM
I am hoping to make it again...what a great show and a great time. ______________________________________ Super Tight Lines......Don Re: 2014 Expo
Posted by:
Bill Eshelman
(---.lightspeed.bcvloh.sbcglobal.net)
Date: May 28, 2013 05:08PM
I missed. Last. Year BUT, I. Will. Be. There next. Year.
Thanks, Bill Ohio Rod Builders Canton, Ohio Re: 2014 Expo
Posted by:
Don Morse
(---.dhcp.aldl.mi.charter.com)
Date: May 28, 2013 05:12PM
That's. a .lot of .periods .Bill. ______________________________________ Super Tight Lines......Don Re: 2014 Expo
Posted by:
Bill Eshelman
(---.lightspeed.bcvloh.sbcglobal.net)
Date: May 28, 2013 07:17PM
I use my I-pad and forget to check it before sending. Half the time the space bar doesn'twork (see?) half the time it is the auto correct. The other half might be my fault. I
I am good at math too. That's my story,. Period. Bill Ohio Rod Builders Canton, Ohio Re: 2014 Expo
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: May 28, 2013 08:45PM
Great show i'll be there again. Re: 2014 Expo
Posted by:
Jim Rippe
(---.lightspeed.cicril.sbcglobal.net)
Date: May 28, 2013 10:55PM
Tom, the reception would be on the 22nd which is Saturday, right? Not the 23rd which would be Sunday. Re: 2014 Expo
Posted by:
Tom Kirkman
(Moderator)
Date: May 29, 2013 07:01AM
You're correct. It would be the 22nd.
............ Re: 2014 Expo
Posted by:
corky fleming
(---.hsd1.ga.comcast.net)
Date: May 29, 2013 08:47AM
Looking forward to attending. I look forward to this event each year starting on Sunday morning before I leave the current years event. THANKS Tom for a great and wonderful week end. Corky Corky's Custom Rods Savannah, Georgia Sorry, only registered users may post in this forum.
|