SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 16 of 16
5 years ago
Tim Whitley
Back in early 2011 started build of Payne 97 taper rod. Down to apply varnish for finish of rod. What has been accomplished applied single brush coat of plain spar varnish guides wrapped my question is will spray can varnish work? I had planned to dip finish rod but would like to ask about this method of spraying rattle can varnish to complete rod.
Tim
Forum: rodboard 5 years ago
Tim Whitley
2. Bass blank
I have not followed forum in several years suggestion on bang for buck blank kayak fishing small river/creeks 6 1/2 feet MH texas rig jig rod.
Thank you in advance
Forum: rodboard 12 years ago
Tim Whitley
I have good friend asking for a drop shot build. What set up, guide and handles spinning would you guys use. If you wish to make blank recommendations fine but set up is my main concern.
Thanks
Tim
Forum: rodboard 12 years ago
Tim Whitley
Have a 7 ' Carolina Riggin Tom Mann jr signature rod that needs #3 transition guide replaced what guide and color main and trim wraps?
Thanks
Tim
Forum: rodboard 13 years ago
Tim Whitley
Looking for a good suggestion on bream blank any suggestions spinning, handle setup guides so forth
Thanks
Tim
Forum: rodboard 13 years ago
Tim Whitley
The Hiwassee is great site close to you wish I lived 30 minutes away like you. If you like to stream fish for spots I am about 2 hours south of you and we have property along the Locust Fork of the
Warrior river great spotted bass fishing in a stream.
Tim
Forum: rodboard 13 years ago
Tim Whitley
I am building for my use a SC5 7' feet Heavy action rod for C-rig and football jigs to be used on Guntersville. Spiral or not and will go with micro's, if all on top use size 4 all the way or start with a 6 and work down. If spiral what is suggested setup? Will use split grip thoughts on balance issues will I need weight in butt?
Thanks
Tim
Forum: rodboard 13 years ago
Tim Whitley
8. SC5 blanks?
What is the advantage of SC5 blanks with the NSi technology versus the SC5 blanks without? Some of the standard blanks are available at deep discounts would you buy one or build with the NSi resins?
Tim
Forum: rodboard 13 years ago
Tim Whitley
Can someone tell me what blank is used for Duckett rods?
Thanks
Tim
Forum: rodboard 13 years ago
Tim Whitley
Jim
I build with micro guides single color simple wrap in attempt to keep weght down. I was hoping someone would bring up NFC HM blanks. Jim have you purchased a NFC blank to build? The St Croix SCV is of know quality and seems to be blank more widely used to build on. Larry and Jim which SCV blanks have you used?
Tim
Forum: rodboard 13 years ago
Tim Whitley
I am a bass fisherman and would like opinions on most sensitive bass blanks. I know that in general the thinner and lighter the blank the more sensitive and usually less durable. I can accept that rod may fail with some fishing situations i.e. improper handling. Will build only for personal use so only one person will fish rods. Currently fishing Loomis IMX and GLX and appreciate the feel of thes
Forum: rodboard 13 years ago
Tim Whitley
Closer to lake Guntersville but do travel to Montgomery 4 or 5 times a year and Wetumpka is short distance.
Tim
Forum: rodboard 13 years ago
Tim Whitley
Is there someone in North Alabama that would allow me to look over there shoulder when building a rod? It would be fantasic to talk about building with individual that has experience in making different rod applications.
Thanks
Tim
Forum: rodboard 13 years ago
Tim Whitley
Thank you for all responses this forum is a great source of information
Tim
Forum: rodboard 13 years ago
Tim Whitley
Looking for a small stream blank that is great value bang for the buck any suggestions 3wt 6' 6' can vary on length?
Thanks
Tim
Forum: rodboard 13 years ago
Tim Whitley
16. CCS? testing
Please help first time builder determine what is CCS testing of blanks. I searched but could not find explanation.
Thanks
Tim
Forum: rodboard
Current Page: 1 of 1
|