SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 29 of 29
8 years ago
Greg LaPolla
I live out near Riverside and have the same issue. I just finished up a thread master lite 8 oz kit and it was almost orange. Never had an issue. All epoxy will turn yellow over time. I now store it in cool dark place inside the house.
Forum: rodboard 8 years ago
Greg LaPolla
The best way to mix eva and cork is weldwood contact cement. Use 2 thin coats on each piece and let it dry completely.
Forum: rodboard 9 years ago
Greg LaPolla
The login panel is fixed. I turned off login because people were creating accounts when I was developeing it and I forgot to turn it back on.
The site does require newer browsers that are html 5 aware. The site will render on any device (tablet, phone, computer, etc). IE 11, newest versions of Chrome, Firefox or Safari should work fine. Older browsers may have issues rendering.
There
Forum: rodboard 9 years ago
Greg LaPolla
When I have used citristrip, I usually brush it on foil pretty thick and wrap the rod in the foil for about 4 hours and the paint usually wipes off with a rag (sometimes a platic putty kniff for the little spots that refuse). Not sure how much you applied, but I have always had good luck doing it this way.
Forum: rodboard 9 years ago
Greg LaPolla
6. Re: Pink
Steve,
Yes its Lemke.
It will be going on a black Matrix 4 piece 5 wt
Forum: rodboard 9 years ago
Greg LaPolla
7. Re: Pink
I have been making CFR donation Rods for 4 years and the pink is always a hit.
Here is one I am working on now:
Forum: rodboard 9 years ago
Greg LaPolla
I built 4 WT Quickline when they first came out. It broke just casting in the back yard in about the same place you are describing. Pac Bay replaced the whole blank which did not match up with the old one. I rebuilt it again and it broke in the same spot again (between two guides) casting in the back yard. I never got a replacement again, just wrote it off and dont use quickline blanks at al
Forum: rodboard 10 years ago
Greg LaPolla
Harbor Freight has 20% and sometimes 25% off coupons. Join their mailing list and you will get them. I used a 25% off and got that lathe for around 150 bucks.
Forum: rodboard 10 years ago
Greg LaPolla
11. Re: Syringes
I dont clean mine. I just put the caps back on them. If they have print on them any chemicals will quickly remove it.
Forum: rodboard 11 years ago
Greg LaPolla
For the Batson blank look here:
For the St Croix look here:
That should get you started
I would go with a 12 and a 10 stripper then 4 4's and 4 3's in the single foot
Greg
Forum: rodboard 11 years ago
Greg LaPolla
older Anglers workshop catalogs had Gudebrod numbers in the Prowrap color chart.
Forum: rodboard 11 years ago
Greg LaPolla
It wont bleed through if you follow this . I do 4 or 5 turn trim band using this method all the time.
Forum: rodboard 11 years ago
Greg LaPolla
I may not be visualizing this properly, but you can move the thread carriage to far left of the track and put both holders to the right of it.
Greg
Forum: rodboard 11 years ago
Greg LaPolla
19. Re: CCS Data
If you unblock youer email address I can email you the excel spreadsheet.
Greg
Forum: rodboard 11 years ago
Greg LaPolla
I use decal connection. I f you do the layout and send them the output in eps or vector and send along the fonts you use they can print it (I use Adobe Illustrator). I usually order over the weekend and recieve it by mail on wednesday or thurday. Very quick turn around time and great customer service. If you have questions call them.
Greg
Forum: rodboard 12 years ago
Greg LaPolla
I just built a Quickline 9ft 4 wt. Very fast action. I got a 10 ft blank from @#$% by Kingfisher. I think they are the same blanks roger sells. It turned out alright. I got the blank for .99 cents so I cant complain! If I had to choose I would go with the quickline.
Greg
Forum: rodboard 12 years ago
Greg LaPolla
I read the article Adventures With Wood in the library. I have been thinking about doing a handle using this technique. Rays website is no longer, I was wondering if anyone has the jig plans he was offering.
Thanks
Greg
Forum: rodboard 12 years ago
Greg LaPolla
I just used threadmaster lite for the first time. Had the same issue on two of the wraps. Second coat coverd it up perfectly, third coat is was smooth as glass.
Greg
Forum: rodboard 12 years ago
Greg LaPolla
Give them a call. They have a new website and a lot is still missing.
Greg
Forum: rodboard 12 years ago
Greg LaPolla
Jim,
By putting down a layer of epoxy first, the edges of the decal will disappear magically.
Greg
Forum: rodboard 12 years ago
Greg LaPolla
Jeff -
I use adobe Illustrator. Whatever you use you it has to be vector graphics, I believe they can take ai or eps formats. The artwork you use has to be vector as well.
Greg
Forum: rodboard 12 years ago
Greg LaPolla
I also would recommend Decal Connection. You cant beat their price or service. I have tried other Rod Label Makers only to be disappointed when the package arrived. I can put together a label in Adobe Illustrator, upload it to their site and in 3 days the label arrives. The labels from Decal Connection are die cut to exact dimensions and they have a protective plastic Strip over the top of th
Forum: rodboard 12 years ago
Greg LaPolla
My hat is off to Pac Bay.
As Tom said this is definitely a positive for Pac Bay.
Forum: rodboard 12 years ago
Greg LaPolla
I am fairly new to this board, been lurking in the shadows for a short while and have found a wealth of information here. I am looking to build a fast 4 weight. I have narrowed my search to 2 blanks a Batson (RX8) XF904-4 or a Pac Bay (quickline) FAF9044. I have built a 2wt RX6 and 3wt RX7 on Batson blanks and have nothing but good things to say about them. Does anyone here know how these tw
Forum: rodboard
Current Page: 1 of 1
|