SPONSORS
2024 ICRBE EXPO |
Brothers label printer
Posted by:
Douglas Roeber
(---)
Date: April 02, 2024 07:02PM
Is there a thin printing tape I can use in Brothers label Makers? I saw a YouTube video somebody replaced the brothers tape with a very thin label tape that was more suitable for fishing rods but unfortunately the video was in a foreign language. I’ve tried using brothers tapes but they’re just too thick they don’t Conform real well to the radius on the rod Re: Brothers label printer
Posted by:
Tom Kirkman
(Moderator)
Date: April 03, 2024 09:00AM
Here is a trick you can try - after affixing the label to the rod, overwrap it with A thread, snugly. Let it sit overnight. When you remove the thread you may find that the label is now bound to the rod blank securely included the edges.
............ Re: Brothers label printer
Posted by:
Terje Bendiksby
(---)
Date: April 03, 2024 11:46AM
I did it a little different. Overwrapped the label with silk and coated with epoxy when I epoxied the rest of the threads. Re: Brothers label printer
Posted by:
Ken Schoenberg
(---.res.spectrum.com)
Date: April 07, 2024 02:48PM
Terje,
Can you share a picture of what that looked like when you were done? Re: Brothers label printer
Posted by:
Lance Schreckenbach
(---)
Date: April 07, 2024 09:11PM
On Amazon I found other tapes that are not by Brother but work with the P-touch line TZe. They have White, red, and blue on clear tape. I also found gold on clear. Re: Brothers label printer
Posted by:
Dan Kong
(---.dia.static.qwest.net)
Date: April 09, 2024 08:54AM
Lance Schreckenbach Wrote:
------------------------------------------------------- > On Amazon I found other tapes that are not by > Brother but work with the P-touch line TZe. They > have White, red, and blue on clear tape. I also > found gold on clear. Would these work in a P-Touch Cube? Sorry, only registered users may post in this forum.
|