SPONSORS
2024 ICRBE EXPO |
Threaded barrel for reel seat...
Posted by:
Abe Henderson
(---.gci.net)
Date: January 16, 2024 06:59PM
Hi all, first post here.
I'm looking for a 6"+ threaded barrel that will accept a standard fuji threaded hood. I'd like to have threaded hoods on both ends instead of an uplocking or downlocking seat, so I can balance a rod without adding weight. Preferably carbon fiber, but nylon/graphite or aluminum is ok. I've seen a picture on a custom surf rod so I know someone somewhere is making them... Anybody know of anything like that? Thanks, Abe [edited] Edited 1 time(s). Last edit at 01/16/2024 07:55PM by Abe Henderson. Re: Threaded barrel for reel seat...
Posted by:
Spencer Phipps
(---)
Date: January 16, 2024 07:30PM
TBNSK threaded barrel from Rainshadow. Re: Threaded barrel for reel seat...
Posted by:
David Baylor
(---.res6.spectrum.com)
Date: January 16, 2024 07:35PM
[getbitoutdoors.com]
Probably what Spencer is talking about. Just scroll down to near the bottom of the page. Re: Threaded barrel for reel seat...
Posted by:
Abe Henderson
(---.gci.net)
Date: January 16, 2024 07:55PM
Thanks Spencer and David - I've seen those. I guess I wasn't clear on my original post, I'm looking for a longer barrel that I could cut to the desired length and mount both hoods on. I could use the shorter barrels with a spacer in between, but I'm hoping to find something longer.
Thanks! Abe Re: Threaded barrel for reel seat...
Posted by:
Tom Kirkman
(Moderator)
Date: January 16, 2024 08:04PM
You may another option but it'll cost you two reel seats. Cut the barrel from each seat, mount them end to end and you will have your single long barrel and 2 hoods.
............. Re: Threaded barrel for reel seat...
Posted by:
Abe Henderson
(---.dynamic.asdk12.org)
Date: January 17, 2024 02:06PM
Thanks Tom Re: Threaded barrel for reel seat...
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: January 17, 2024 04:27PM
Hello Tom.
When I read this the other day I remembered you did an article on reel seat tubes, I had some time today and looked it up; it was on shortening and not extending them. So if anyone wants to shorten a Seat Barrel heres the article for you. Volume/Issue...Article........Page. 24/1 Seat Barrel Length. 20 Memory is not what it used to be! Tight Wraps & Tighter Lines. Re: Threaded barrel for reel seat...
Posted by:
Spencer Phipps
(---)
Date: January 17, 2024 04:43PM
Lengthen one is pretty simple, just put two or more on an arbor to keep them aligned and move the threads till the nut smoothly moves from one piece to the other. Make alignment marks, glue everything up, align the marks, check to ensure you are still good, let dry and use it. Re: Threaded barrel for reel seat...
Posted by:
Tom Kirkman
(Moderator)
Date: January 17, 2024 05:40PM
Robert,
The article I did was an adjustable reel seat that allowed you move the reel fore or aft to achieve whatever balance you wanted. It used two threaded seat hoods as I described above. It would have been in a very early issue. .......... Re: Threaded barrel for reel seat...
Posted by:
Herb Ladenheim
(---.68.237.4.hwccustomers.com)
Date: January 17, 2024 06:22PM
Tom Kirkman Wrote:
------------------------------------------------------- > You may another option but it'll cost you two reel > seats. Cut the barrel from each seat, mount them > end to end and you will have your single long > barrel and 2 hoods. > > ............. What I was thinking Tom. But a machine shop should fo it to be neat. Herb Re: Threaded barrel for reel seat...
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: January 18, 2024 10:43AM
Hello Tom.
I found it; it was in the Techniques section under "Balancing Fly Rods". I was stuck on the seat barrel thing. Volume/Issue...............Article.................Page. 4/4 Techniques: Balancing Fly Rods. 18 Tight Wraps & Tighter Lines. Re: Threaded barrel for reel seat...
Posted by:
David Baylor
(---.res.spectrum.com)
Date: January 19, 2024 08:06PM
Curious about comfortable a seat like being talked about, would be. I would think hand contact with the threads wouldn't be that comfortable. One of those trade offs kind of things I suppose. Re: Threaded barrel for reel seat...
Posted by:
Ron Weber
(---)
Date: January 19, 2024 09:52PM
Your hand is generally not in contact with the reel seat on a fly rod which I believe is the topic, although I I been know to mis read Re: Threaded barrel for reel seat...
Posted by:
David Baylor
(---.res6.spectrum.com)
Date: January 20, 2024 12:26PM
Ron..... ahhh ok, and makes sense what with the grip ahead of the reel. Re: Threaded barrel for reel seat...
Posted by:
Les Cline
(---)
Date: January 20, 2024 12:45PM
If you have a threaded tube long enough, you can use, for example, a Fuji HPS or KDPS hood. Then use cork or CF hood-sleeves to make a grip that will screw down from Both ends. Your hand will not touch any threads.
That's the way I read it. Re: Threaded barrel for reel seat...
Posted by:
David Baylor
(---.res6.spectrum.com)
Date: January 21, 2024 06:09AM
Les ..... heck yeah !!! That's a good idea right there. Sorry, only registered users may post in this forum.
|