I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Source for custom enameled end cap
Posted by: Marco Cecala (---)
Date: October 09, 2023 10:17AM

I am doing a custom rod that needs an enameled butt cap. It is a multi-colored logo. Is there anyone out there that can do this? Thanks.

Options: ReplyQuote
Re: Source for custom enameled end cap
Posted by: Tom Kirkman (Moderator)
Date: October 09, 2023 04:30PM

I'm sure there is a specialty shop somewhere that could do it. Doubtful they are connected to the rod building world specifically, but I'm sure there is someone that could do it.

Is there any other method you might use? Scrimshaw? Engraving?

.............

Options: ReplyQuote
Re: Source for custom enameled end cap
Posted by: Marco Cecala (---)
Date: October 09, 2023 04:49PM

I may have to go that way, Tom. It is a colored logo, and I am getting ideas on having a custom lapel pin made and attaching it to a custom-turned end cap.

Options: ReplyQuote
Re: Source for custom enameled end cap
Posted by: Norman Miller (Moderator)
Date: October 09, 2023 05:09PM

There are a number of enamel pin manufacturers that do custom work. I doubt very much they would do just a single piece. So, you would probably need to have multiple copies made. If it’s your business logo might not be a bad way to go. Some of the pin manufacturers do very nice work.
Norm

Options: ReplyQuote
Re: Source for custom enameled end cap
Posted by: Marco Cecala (---)
Date: October 09, 2023 05:38PM

Thanks, Norm. I have seen a couple out there and may go with one of them.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster