SPONSORS
2024 ICRBE EXPO |
Some Help Needed
Posted by:
Karl Miller
(---)
Date: June 21, 2023 02:47PM
A Vietnam Paraplegic Vet from the Pittsburgh area made me an 8 weight 9 foot Atlantic Salmon rod in or around June, 1977-78. It was made from a Fenwick Woodstream HMG blank (GFL 108-8). I am writing a history of the rod BUT I lost the name of the Vet who constructed it. The Vet was an Army soldier and in order to pay this Vet my respects when writing the rod's provence, I need to find his name. He made me an wonderful rod and in my written history of the rod, I want to pay him my respect and thanks.
I served during Nam and I am 80 years old. I was told that the rod builder/Vet that I am looking for has passed away. Can any one help me find the name of this gentleman? Re: Some Help Needed
Posted by:
Mark Talmo
(71.147.59.---)
Date: June 21, 2023 03:42PM
Karl,
Your desire to pay respect to the disabled VietNam vet is commendable and worthy of the effort. Unfortunately, I can not offer any assistance. With its broad base, this site may be the best of them in discovering the builder’s name. Possibly contacting the OLD tackle stores and such in the Pittsburgh area might prove fruitful. Other than that, I’ve got nothin’. GOOD LUCK!!! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Some Help Needed
Posted by:
Joseph Willsen
(---.dyn.optonline.net)
Date: June 22, 2023 01:39PM
I might try local VFW's....they would remember him. Re: Some Help Needed
Posted by:
Mark Talmo
(---)
Date: June 22, 2023 03:33PM
Excellent call, Joseph. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Some Help Needed
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: June 22, 2023 04:30PM
Hello Carl.
The local VA might be able to help you too, If you know his old unit they might be able to help also. Good Luck & Good Job. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Some Help Needed
Posted by:
Don Lukehart
(---)
Date: June 22, 2023 05:11PM
There is a rod building shop in the Pittsburgh area that has been in business for a number of years now that might be able to help you?
The Hook and Hackle Company - 1-800-552-8342 Good Luck Don Re: Some Help Needed
Posted by:
david taylor
(---)
Date: June 23, 2023 11:05AM
I agree with trying Hook and Hackle, nice guys, I would also check with the fly fishing program at Penn State, and I would post on the NA Fly Fishing Forum, and ask the local TU chapter as some of its older members may know.
FTI: SaraBella rod company in Colorado uses vets to wrap and epoxy its rods. Sorry, only registered users may post in this forum.
|