NFC 360 pro

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Re: NFC 360 pro

Posted by: Spencer Phipps (---)

Date: February 22, 2023 12:34AM

Depends on the type of rod holder you have, whatever it is you want to be able to get a nice 'full' grip on the rod foregrip to remove the rod from it, mine are 5 to 6 inches long usually, some holders hide a bit of the grip when you reach for the rod. Rear grip is 13 - 14 inches on that length rod and made on a carbon tube to slide out easily under a full salmon takedown. The ones I saw at a glance on some of the Edge rods are a well-done tapered foam / carbon foregrip and straight reel grip, the foregrip looked closer to 8 inches, reel seat was a black Alps single trigger ATEX aluminum reel seat, very sharp looking. Foregrip shaped similar to a Half Wells fly grip.

Edited 1 time(s). Last edit at 02/22/2023 12:47AM by Spencer Phipps.

Options: Reply•Quote