SPONSORS
2024 ICRBE EXPO |
Wood Hardener
Posted by:
Jeff Leonard
(---)
Date: December 14, 2022 03:24PM
Years back I came across an article that used wood hardener as a casting resin rather than epoxy or polyester. I remember trying it and was very satisfied with the results however it was so long ago I have forgotten the procedure. Can someone refresh my memory or tell me where to find the article.
Thanks Muskyfsh Re: Wood Hardener
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: December 14, 2022 04:41PM
Hello Jef.
Maybe one of these? Good Luck. Vol / Issue --------------------Name--------------------------Author-------------------------- Page 9/4 Wood Assemblies, Multi-Species (For Seat Inserts But Could Be Used For Handles). 24 22/1 Wood Bath, Resinous. By Curtis Goodwin. 12 12/2 Wood Finish That’s Perfect. 22 25/2 Wood Plug Grips Make Your Own By Bill Ballou 20 12/5 Wood Veneering. By Ted Culin. 16 Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Wood Hardener
Posted by:
Jeff Leonard
(---)
Date: December 14, 2022 05:18PM
Thanks Robert,
I was not not sure if it was in RodMaker or RodCrafters, i will look into it. Muskyfsh Re: Wood Hardener
Posted by:
Tom Kirkman
(Moderator)
Date: December 14, 2022 06:05PM
I wrote that article but it was a long, long time ago. Would have been back in one of the black and white RodMakers. It's just common Minwax type wood hardener which is often used for saving wood that has begun to rot.
........... Re: Wood Hardener
Posted by:
Jeff Leonard
(---)
Date: December 15, 2022 10:57AM
Tom,
Some of my older volumes got destroyed in a basement flood. I forgot what was used for a mold or any other tips pertaining to the article would be appreciated. Thanks Tom Muskyfsh Sorry, only registered users may post in this forum.
|