SPONSORS
2025 ICRBE |
Re: Label Printer
Posted by:
Dean Veltman
(---.source.akaquill.net)
Date: January 02, 2023 10:24AM
Since this thread started, the LW-C610PX printer was released which is a lot cheaper than the px-800 but prints with the same higher dpi
and uses the same cartridges. Re: Label Printer
Posted by:
Dean Veltman
(68.60.45.---)
Date: January 02, 2023 10:27AM Here is a label I printed with the LW-C610PX Re: Label Printer
Posted by:
El Bolinger
(---.bstnma.fios.verizon.net)
Date: January 02, 2023 11:43AM
Just to add? Even though I have no idea about cost difference etc, I would recommend looking at the cricket craft machine. My sister in law does TONS of stuff with it, custom printed pictures on mugs and decals on wood/metal etc. Just throwing it out there Re: Label Printer
Posted by:
Michael Ward
(---)
Date: January 02, 2023 10:04PM
Daniel Grundvig Wrote:
------------------------------------------------------- > I've only been able to find silver on clear at LTR That’s correct. They are specially hand assembled by Larry. Re: Label Printer
Posted by:
Mark Talmo
(---)
Date: January 02, 2023 11:47PM
Trung,
As Michael, and probably many others, I apply a decal of my logo on builds unless requested otherwise. Obviously, depending on the size of the logo, one receives quite a few logos and the price is reasonable from Decal connection. If a customer wants an additional inscription, the $5.00 charge, delivered, from DC is easily accepted and passed onto that customer. Personally, I see no need or benefit from printing my own. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Label Printer
Posted by:
Steven Paris
(---.37.17.98.dynamic.ip.windstream.net)
Date: January 03, 2023 08:23AM
I still use the ink jet printer, currently the epson et- 2760 and the Papilia vinyl paper. I keep it simple with white on black most of the time.
Steve Re: Label Printer
Posted by:
Charles Aschenbeck
(---)
Date: July 31, 2024 01:20PM
@ Dean Veltman, how did you round of the corners so cleanly? Re: Label Printer
Posted by:
Dean Veltman
(185.217.168.---)
Date: July 31, 2024 10:34PM
I bought some corner punches off Amazon, They work ok-ish. I think it was a combination of those and a scissors to even it out. There has to be a better corner punch to do it in one step, but I think I used the punch on each corner and then a scissors to round it a bit more. Re: Label Printer
Posted by:
Charles Aschenbeck
(---)
Date: August 07, 2024 06:12PM
Dean, thanks for the reply. I ended up getting the Epson LW-PX800 which has a built in cutter for rounding the corners. Re: Label Printer
Posted by:
Jeremy Moore
(---)
Date: August 21, 2024 02:57PM
El Bolinger Wrote:
------------------------------------------------------- > Just to add? Even though I have no idea about cost > difference etc, I would recommend looking at the > cricket craft machine. My sister in law does TONS > of stuff with it, custom printed pictures on mugs > and decals on wood/metal etc. Just throwing it out > there My wife had the Cricut. It works great on larger fonts, but real small font, it won’t work. It can’t make the cuts. My wife played around with it some and was able to get by using certain fonts, etc. I was hoping It would do whatever I wanted. Re: Label Printer
Posted by:
Larry Tobin
(---)
Date: September 09, 2024 02:22PM
Chrome Silver print (on clear or black) for your EPSON PX Labelworks or K-Sun PEARLabel printers. Available in ½” & 1”. Working with rod builders since 1984.
Not Black on Silver Matte, but our Custom Chrome Silver print on clear or on Black. Free Samples are available upon request. Larry Tobin LRT Group, Inc. www.LRTGroup.com Larry@LRTGroup.com 954-257-6224 Sorry, only registered users may post in this forum.
|