SPONSORS
2024 ICRBE EXPO |
Carbon fiber grip help
Posted by:
Alex purvis
(---)
Date: July 14, 2022 11:52AM
[northforkcomposites.com]
Was looking at these grips and saw that they accommodate reel seats ranging from 21 mm to 25 mm. Has anyone used these? I know it may be a dumb question but im assuming the recessed cut out measures at 25 mm so if my reel seat hood measures at 21mm do I just shim the hood for a snug fit? I was just concerned with there being some visible gaps with my reel seat and the recessed cut out that would look undesirable. Re: Carbon fiber grip help
Posted by:
Stan Daubinawski
(---.sub-174-250-20.myvzw.com)
Date: July 14, 2022 12:07PM
Great Question, I have one of these and need to order a fly rod reel seat to go with and see what it looks like(fit wise) and what will need to be done.. Looking forward to seeing the responses.. Re: Carbon fiber grip help
Posted by:
Spencer Phipps
(---)
Date: July 14, 2022 11:09PM
Unlike cork, eva has some fexibility to it, I think they may be saying a 21mm cutout has been made, but it can expand up to a 25mm cutout if needed. This is nothing new, rod builders have long known eva grips will expand so they need not be perfectly reamed to fit like cork grips. I have stretched eva grips to fit that stopped a foot from the butt with no lroblems for decades.
When in doubt call, email or k go onmfacebook and ask them. I had talked to Aleks on all these forms of communication. Re: Carbon fiber grip help
Posted by:
Alex purvis
(---.res6.spectrum.com)
Date: July 15, 2022 12:12AM
Thanks for the response Spencer. I’m going to disagree though, because if you zoom in on some of the photos you can see a metal ring for the recess. So that side of the grip doesn’t appear to be Eva foam. Re: Carbon fiber grip help
Posted by:
Stan Daubinawski
(---.sub-174-250-20.myvzw.com)
Date: July 15, 2022 12:48AM
Took a few pictures of the grips Alex
[imgur.com] Re: Carbon fiber grip help
Posted by:
Alex purvis
(---.res6.spectrum.com)
Date: July 15, 2022 10:07AM
Thanks for that! Could you measure the recess without that metal trim in it? I’m curious how a 25mm hood would fit anywhere in that. Re: Carbon fiber grip help
Posted by:
Stan Daubinawski
(---.sub-174-250-20.myvzw.com)
Date: July 15, 2022 12:22PM
Here you go. The foam on the inside cut out could be sanded down all the way out the the Carbon Fiber. So that is where the 25mm dimension is coming from.(You ream the center to fit the rod same foam material in the cutout)
[imgur.com] Re: Carbon fiber grip help
Posted by:
Alex purvis
(---)
Date: July 15, 2022 06:09PM
Interesting. Thanks for that! Sorry, only registered users may post in this forum.
|