SPONSORS
2025 ICRBE |
ISO 2 piece walleye jigging blank
Posted by:
David Luttig
(---)
Date: February 05, 2022 12:43PM
Looking for a walleye jigging blank but it has to be 2 piece, no longer then 6’8”. Will be used as a vertical jigging rod for walleye in the Detroit river. Jig weight up to 1 oz. What have you built on that is a quality blank? Thanks!
Dave Re: ISO 2 piece walleye jigging blank
Posted by:
Spencer Phipps
(---)
Date: February 05, 2022 02:13PM
How about 3 piece? Rainshadow SB783-3CG, Utmost Ent. would be a good choice Re: ISO 2 piece walleye jigging blank
Posted by:
David Luttig
(---)
Date: February 05, 2022 03:31PM
Possible, but I’m sure he would rather have a two piece. Re: ISO 2 piece walleye jigging blank
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: February 05, 2022 04:25PM
Check out Rainshadow Revelation, I think there are some two piece blanks there. Re: ISO 2 piece walleye jigging blank
Posted by:
Spencer Phipps
(---)
Date: February 05, 2022 09:08PM
Less than 7 ft., 2 piece with the tip to snap 1 oz. in a river en vironment. A pretty rare bird. No mention of budget, looks like Schrneider's lists the same blank in the graphite used in the Revelation in their hot deals section a discontinued blank, the ISB783-3CG in a green blank. You could go with a custom from CTS if the budget lets you. Re: ISO 2 piece walleye jigging blank
Posted by:
Steven Paris
(---.37.17.98.dynamic.ip.windstream.net)
Date: February 06, 2022 10:11AM
Revs68M-2....what we use in the one piece version.
Steve Re: ISO 2 piece walleye jigging blank
Posted by:
David Luttig
(---)
Date: February 06, 2022 10:58AM
Thanks for the suggestions. I will take a look at them all. Sorry, only registered users may post in this forum.
|