I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

ISO 2 piece walleye jigging blank
Posted by: David Luttig (---)
Date: February 05, 2022 12:43PM

Looking for a walleye jigging blank but it has to be 2 piece, no longer then 6’8”. Will be used as a vertical jigging rod for walleye in the Detroit river. Jig weight up to 1 oz. What have you built on that is a quality blank? Thanks!
Dave

Options: ReplyQuote
Re: ISO 2 piece walleye jigging blank
Posted by: Spencer Phipps (---)
Date: February 05, 2022 02:13PM

How about 3 piece? Rainshadow SB783-3CG, Utmost Ent. would be a good choice

Options: ReplyQuote
Re: ISO 2 piece walleye jigging blank
Posted by: David Luttig (---)
Date: February 05, 2022 03:31PM

Possible, but I’m sure he would rather have a two piece.

Options: ReplyQuote
Re: ISO 2 piece walleye jigging blank
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: February 05, 2022 04:25PM

Check out Rainshadow Revelation, I think there are some two piece blanks there.

Options: ReplyQuote
Re: ISO 2 piece walleye jigging blank
Posted by: Spencer Phipps (---)
Date: February 05, 2022 09:08PM

Less than 7 ft., 2 piece with the tip to snap 1 oz. in a river en vironment. A pretty rare bird. No mention of budget, looks like Schrneider's lists the same blank in the graphite used in the Revelation in their hot deals section a discontinued blank, the ISB783-3CG in a green blank. You could go with a custom from CTS if the budget lets you.

Options: ReplyQuote
Re: ISO 2 piece walleye jigging blank
Posted by: Steven Paris (---.37.17.98.dynamic.ip.windstream.net)
Date: February 06, 2022 10:11AM

Revs68M-2....what we use in the one piece version.
Steve

Options: ReplyQuote
Re: ISO 2 piece walleye jigging blank
Posted by: David Luttig (---)
Date: February 06, 2022 10:58AM

Thanks for the suggestions. I will take a look at them all.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster