SPONSORS
2024 ICRBE EXPO |
rodmaker magazine eva grips advice
Posted by:
Darwin Wong
(---.cpe.net.cable.rogers.com)
Date: November 12, 2020 12:35PM
Been building for couple years now and love learning new ideas to implement on my rods. I build primarily bass and light freshwater fishing rods.
I want to order some rodmaker magazines back issues with focus on eva grip designs / inlays, maybe other grip ideas though i don't have access to a dedicated lathe yet. Would the Special CD edition on grips (https://www.rodmakermagazine.com/product/special-edition-5-crafting-cork-composite-eva-wood-grips-cd/) be good for me? Or are their newer magazine publications i could backorder that would have more up to date advice/tips? Re: rodmaker magazine eva grips advice
Posted by:
Robert A. Guist
(---.res6.spectrum.com)
Date: November 12, 2020 02:45PM
Hello Darwin.
I have almost all the magazines (RodMaker) printed plus all 5 SE's and the two Magazine on CD- CD's. If you don't plan on getting all the back issues the SE-5 is pretty comprehensive. But... there are new things coming up all the time, I think you should get the SE-5, also get a subscription to RM. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: rodmaker magazine eva grips advice
Posted by:
Darwin Wong
(---.cpe.net.cable.rogers.com)
Date: November 12, 2020 09:01PM
Thanks Bob. Unfortunately I can’t get a direct subscription delivery to Canada. So my plan is to order some back issues in batches to an American resshipper.
Do you know what volumes the CD-5 covers? Like if I also ordered back issues volume 10 would that already be on the CD? Re: rodmaker magazine eva grips advice
Posted by:
Spencer Phipps
(---)
Date: November 12, 2020 10:42PM
The CDs cover articles from many mags put together to cover more about a subject. Re: rodmaker magazine eva grips advice
Posted by:
Tom Kirkman
(Moderator)
Date: November 13, 2020 07:56AM
The SE5 CD includes articles from all volumes related to the particular subject matter listed on the CD description.
............... Re: rodmaker magazine eva grips advice
Posted by:
Darwin Wong
(---.cpe.net.cable.rogers.com)
Date: November 13, 2020 11:07AM
Thanks everyone. I see now that the CD was released pretty recently. Looking forward to reading these! Re: rodmaker magazine eva grips advice
Posted by:
Bill Marchisella
(---.nycmny.fios.verizon.net)
Date: November 16, 2020 02:27PM
Darwin
I wrote a couple of articles in Rodmaker magazine that might be of interest to you. The first one is volume 21 issue 5 on how to use a pie shaped cork cutting jig to give you a barber pole effect. There is also an article on how to make an eva cutting jig. The second article is in volume 22, issue 6 - modifying and using a diamond jig for cork and eva. I hope that this will help you. Sorry, only registered users may post in this forum.
|