SPONSORS
2024 ICRBE EXPO |
color preserver
Posted by:
John Sansevera
(---.hsd1.ny.comcast.net)
Date: September 12, 2020 07:08AM
Miss the old Gudebrod color preserver. I do not care for the water based cp's and can't seem to find a good one that holds the butt wraps in place so they can be trimmed and finished off. Has anyone found a good product that holds the treads in place so they can be wrapped off without unraveling. Re: color preserver
Posted by:
Tom Kirkman
(Moderator)
Date: September 12, 2020 07:24AM
I typically wrap over the threads before applying color preserver, so the overwrap is what holds them in place. However, if you're wanting to do this with color preserver you might still be able to do it with a water based brand provided you do not thin it.
............. Re: color preserver
Posted by:
ben belote
(---.zoominternet.net)
Date: September 13, 2020 10:46AM
be sure to let it dry well..it gets harder.. Re: color preserver
Posted by:
Tim Shaffer
(---)
Date: September 15, 2020 12:49AM
Flexcoat cp will hold it in place. Use at least 2 coats. Re: color preserver
Posted by:
Marcos Rodriguez
(---)
Date: September 23, 2020 01:03AM
Ive done it with flex coat. Sorry, only registered users may post in this forum.
|