SPONSORS
2024 ICRBE EXPO |
8' to 10' ultralight rod blanks?
Posted by:
Mark D Schulte
(---)
Date: November 13, 2019 08:34PM
I have a friend that is looking for an ultralight rod around 8 to 10 foot. Panfish are the target species. Says he wants to cast small crankbaits and floats. Any suggestions? Some have suggested a 2 to 4 wt fly blank. Thanks as always Re: 8' to 10' ultralight rod blanks?
Posted by:
Michael Sutheimer
(---.wi.res.rr.com)
Date: November 13, 2019 09:43PM
If you can find a light or UL steelhead/salmon blank. Not a lot of options but they are out there. In the process of building one myself once it arrives. I found a closeout blank. The others I considered were the Rainshadow IST1141F. Rodgeeks has a a couple offerings C2SS106ULS2, C2SS90LM2. Northfork Customs has one light option St 1002-2 (Delta LMX). Re: 8' to 10' ultralight rod blanks?
Posted by:
roger wilson
(---)
Date: November 14, 2019 02:42AM
When you want to do long distance casting with an 8 to 10 foot rod and in particular crank baits; I have found that a light action rod works much better for this task than an ultra light.
The light action rod will outcast the untra light rod by about 20-40% depending on the particular blanks in question. Simply put, the light action rod is not so "whippy" as the ultra light rod. 10-4 on the comment about using a salmon rod for this purpose. I have several rods in this category and every one of them are blanks aimed at the salmon fishing crowd. [www.rainshadowrodblanks.com] For example 1141 or 1142 - depending on your needs. [www.rainshadowrodblanks.com] Or the 1142 or the 1143 in the series posted just above. [www.rainshadowrodblanks.com] Or the 1141 or the 1142 as needed. Good luck Re: 8' to 10' ultralight rod blanks?
Posted by:
Laurent Keiff
(---.coucou-networks.fr)
Date: November 14, 2019 03:02AM
Like Michael already mentioned, NFC st1002 in either Delta or HM yields a great light rod. Some use it in France to fish toc-style, which is long drifting a line with just a couple of shots on it and a worm. Precise, extremely sensitive (an absolute must with this kind of fishing where all you have to detect a bite is the 'toc' (French for 'tug')). And then you've got the legendary Loomis backbone, in case you get into some monster.
So IMO that would be a great option for your friend _______________________________________________ If I'm not going to catch anything, then I'd rather not catch anything on flies. Prostaff Rodhouse [www.rodhouse.fr] Re: 8' to 10' ultralight rod blanks?
Posted by:
Spencer Phipps
(---)
Date: November 14, 2019 07:35AM
Agree with the DSS 1141, or 1142 option, sensitive, durable, and a good value. Lots of rods, especially kids rods built on the 1141, or 1142 still in use and the kids are grown up, the old color is a dead giveaway. The 1141 would be my choice. Edited 2 time(s). Last edit at 11/14/2019 09:02AM by Spencer Phipps. Re: 8' to 10' ultralight rod blanks?
Posted by:
Ron Schneider
(---.mid.dyn.suddenlink.net)
Date: November 14, 2019 07:38AM
I just want to mention that when you are talking about very light line,
a softer, more moderate action will help protect that line if fighting a large fish. Some years ago we built some 10' "noodle" rods for a local fisherman who was bent on breaking the 2" record for Striper Bass. We both learned a lot about what works under those extreme conditions. Lots of guides, "turnover" wrap, and at that time we used Fuji SIC fly style for the runners. So keep in mind not only casting ability, but also landing a fish. By the way, he broke the IGFA Striped Bass record at 32# ! Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: 8' to 10' ultralight rod blanks?
Posted by:
Ken Brown 2
(---.229.194.3.res-cmts.sm.ptd.net)
Date: November 14, 2019 07:55AM
A 32# striper caught on 2# line? Now that is an accomplishment!
I have seen many people in Pulaski NY catch massive salmon on noodle rods. You wouldn't think it would work at first glance but they do. Probably more difficult to land with all the people in the river but fun nonetheless. Edited 1 time(s). Last edit at 11/14/2019 07:57AM by Ken Brown 2. Re: 8' to 10' ultralight rod blanks?
Posted by:
Phil Ewanicki
(---)
Date: November 14, 2019 08:58AM
The main drawback to catching big fish on light lines is the long fight kills the fish. Re: 8' to 10' ultralight rod blanks?
Posted by:
Spencer Phipps
(---)
Date: November 14, 2019 09:07AM
Phill makes a good point, though I don't think it applies to panfish so much. Re: 8' to 10' ultralight rod blanks?
Posted by:
Gary Frank Gore
(---.hfc.comcastbusiness.net)
Date: November 14, 2019 10:18AM Re: 8' to 10' ultralight rod blanks?
Posted by:
James Taylor
(---.wavecable.com)
Date: November 14, 2019 10:23AM
Rainshadow Revelation REVS90L-2SB 9' 2-piece, Mod-F and Light action - Designed specifically to be a Float and Fly rod - [www.rainshadowrodblanks.com]
As mentioned above the RX7 IST1141 - [www.rainshadowrodblanks.com] and the RX6 DSS1141-2 - [www.rainshadowrodblanks.com] James Taylor Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Re: 8' to 10' ultralight rod blanks?
Posted by:
Herb Ladenheim
(---.lightspeed.rcsntx.sbcglobal.net)
Date: November 14, 2019 11:53AM
Mark,
I happen to have a 4 Piece CTS blank that may interest you. One of my customers abandoned the blank a few years ago and has been in my blank-rack since then. The label states it is a 9'0" 0.2 Oz to 0.7 Oz. But I think 0.7 Oz is much too optimistic. I think the sweet spot would be closer to 0.25 Oz. Will sell below cost. Herb U.S. Dist. CTS Rod Blanks P.S. - he can ship back for refund if not happy. Edited 2 time(s). Last edit at 11/14/2019 12:36PM by Herb Ladenheim. Re: 8' to 10' ultralight rod blanks?
Posted by:
herb canter
(---.atmc.net)
Date: November 14, 2019 12:58PM
Phil Ewanicki Wrote:
------------------------------------------------------- > The main drawback to catching big fish on light > lines is the long fight kills the fish. If you're talking about mono i agree but it's a totally different situation with light braid . Today's light braids including fused super lines will land fish over 30 pounds WITHOUT having to play them out , haven't surf fished with line over 20 pounds in decades , 99% of the time i use between 10 and 14 pound braid and never had a fish i needed to play and wear out because the line was too light , now 4 and 6 pound braid you will need to play out big fish but with 10 pound and above you can apply immense pressure without fear of failure. Re: 8' to 10' ultralight rod blanks?
Posted by:
Phil Ewanicki
(---)
Date: November 14, 2019 01:14PM
Herb: True. I guess what bothers me is the bozos, no matter what kind line of line, reel, or rod they are using, play fish to death to satisfy some gruesome urge they have and then "release" the fish and brag about it. Re: 8' to 10' ultralight rod blanks?
Posted by:
herb canter
(---.atmc.net)
Date: November 14, 2019 01:37PM
Phil Ewanicki Wrote:
------------------------------------------------------- > Herb: True. I guess what bothers me is the bozos, > no matter what kind line of line, reel, or rod > they are using, play fish to death to satisfy some > gruesome urge they have and then "release" the > fish and brag about it. Anybody who purposely chooses to use gear that they know is too light for the sole reason as to fight fish for as long as possible for their own personal enjoyment has no business fishing period imo . Responsible anglers use gear that they know can quickly and efficiently land fish , there are anglers out there that think fishing is about the fight and that is certainly unfortunate . Two things drive me nuts , one is seeing people allowing a fish they intend to release being paraded around up and down the beach for everyone to see and keeping it out of the water much much longer than necessary and the other is seeing people leave fish on the beach to die because in their opinion it's a trash fish . Appreciate the comments Phil , with you 100% . Re: 8' to 10' ultralight rod blanks?
Posted by:
Mark Blabaum
(---.broadband.sta.mhtc.net)
Date: November 14, 2019 02:59PM
Just built this for myself: Rainshadow Revelation REVS90L-2SB 9', for the sole use as a slip bobber rod for panfish, should work well for your intended purpose. The action is very similar to my favorite B'n'M bobber rods. Sorry, only registered users may post in this forum.
|