I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

sealing EVA grips
Posted by: Craig Gilbert (---.res.spectrum.com)
Date: June 11, 2019 12:48PM

Greetings all! I am fairly new to rod building, and I have a question. My daughter has requested I build her a rod, and she specifically wants white EVA foam grip! I recommended against it, due to the likelihood of it getting very dirty very quickly, but she has her heart set on it. Is there a way to seal the EVA foam after shaping to prevent this from happening? I was thinking about using color preserver, or a spray urethane.... any suggestions please!

Options: ReplyQuote
Re: sealing EVA grips
Posted by: Tom Kirkman (Moderator)
Date: June 11, 2019 01:48PM

Due to the soft nature of EVA, it's hard to seal it with anything. The good news is that EVA cleans easily with soap and water, or in the worst of cases, a light sanding.

..................

Options: ReplyQuote
Re: sealing EVA grips
Posted by: Craig Gilbert (---.res.spectrum.com)
Date: June 11, 2019 02:43PM

Thank you Tom!

Options: ReplyQuote
Re: sealing EVA grips
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: June 11, 2019 06:17PM

Craig,
Just keep a bottle of Dawn dish soap and a small hand brush handy at the laundry tub. When, necessary, just give the rod a good rub a dub dub and it will sparkle again.

Also, have your daughter wear a pair of white knit gloves when using it. Keep a few pair when fishing and if a pair of gloves get dirty, put on a fresh pair.

One might laugh, but I use the white knit gloves all of the time when working in the garage and when doing cork turning. I nice way to keep both your hands clean and your work clean.

I buy the gloves by the dozen and keep them in my work shop as well as the garage.

[www.fleetfarm.com]

The reason that I use the knit gloves is that they breathe but still keep the hands protected and clean.

I also keep a box of nitrile gloves in the shop when working with mechanical items to keep my hands clean and my tools clean as well. Over the years, I have scrubbed my hands so much that I wonder how there is still skin on my hands. So, in these years, I would rather protect my hands and my work from the dirt and grease that happens with certain projects, including rod building.

Be safe



Edited 3 time(s). Last edit at 06/11/2019 06:24PM by roger wilson.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster