SPONSORS
2024 ICRBE EXPO |
Nfc 705-1(HM) tip size?
Posted by:
Darwin Wong
(209.171.88.---)
Date: February 20, 2019 01:53PM
Been trying to contact NFC but no answer yet....anyone know the tip size they used on their MB 705-1HM rod?
Site specs say 4 but when I look at the guide spacing table it lists size 4.5. Wanted to order some parts today. Thanks in advance! Re: Nfc 705-1(HM) tip size?
Posted by:
Donald R Campbell
(---.socal.res.rr.com)
Date: February 20, 2019 02:32PM
I would order the 4.5. I just finished a rod that the tip top was spec'd out at 4.0; but, the blank was closer to a 4.5. The 4.5 will still work on a 4.0 tip. IMHO Don Campbell don@sensorfishingrods.com Re: Nfc 705-1(HM) tip size?
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: February 20, 2019 03:56PM
I have that blank on hand, and a size 4 tip top is too small, 4.5 is tight but fits. Anothet blank of the same model that I previously built, I had to use a size 5 tip top.
Norm Re: Nfc 705-1(HM) tip size?
Posted by:
carol staiculescu
(---.cpe.teksavvy.com)
Date: February 20, 2019 06:20PM
I would recommend 4.5 as well . I ordered 4.0 for mine and I had to sand the tip down quite a lot to fit. kingofbeasts custom rods Re: Nfc 705-1(HM) tip size?
Posted by:
Darwin Wong
(---.cpe.net.cable.rogers.com)
Date: February 21, 2019 01:51AM
Perfect really appreciate the help everyone! Looks like i'll go with 4.5 Re: Nfc 705-1(HM) tip size?
Posted by:
Eric MONTACLAIR
(---.subs.proxad.net)
Date: February 21, 2019 01:09PM Sorry, only registered users may post in this forum.
|