SPONSORS
2024 ICRBE EXPO |
Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by:
William Scott Hunt, III
(---.midsouth.biz.rr.com)
Date: November 06, 2018 10:18AM
Trying to find 2 tiptops for 2 personal surf rods I am building:
Fuji TMNATs (titanium frame, Alconite rings). Need a 10(10) and a 10(9). I have tried every place I could, but no luck. My understanding is the Fuji does not make these anymore, but also have heard that some folks may have some laying around. Any ideas? Thanks in advance! Thanks, Scott Hunt scotthuntemail@gmail.com Edited 1 time(s). Last edit at 11/06/2018 10:19AM by William Scott Hunt, III. Re: Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: November 06, 2018 10:48AM
closest I could find [www.anglersworkshop.com] The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: November 06, 2018 10:52AM
William, please contact us at 251-943-4491. Ask for Aaron. Re: Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by:
herb canter
(70.40.105.---)
Date: November 06, 2018 11:42AM
I had to order from overseas because nobody around carries the Fuji (TMNTT-F) or (TMNTT-R) in size 8 with a 6 ring which is whats going on both my surf rods. Most everything in size 8 comes with ring sizes that are much too large for my liking like size 8 or 10 ring sizes. Sorry, only registered users may post in this forum.
|