I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by: William Scott Hunt, III (---.midsouth.biz.rr.com)
Date: November 06, 2018 10:18AM

Trying to find 2 tiptops for 2 personal surf rods I am building:

Fuji TMNATs (titanium frame, Alconite rings). Need a 10(10) and a 10(9).

I have tried every place I could, but no luck. My understanding is the Fuji does not make these anymore, but also have heard that some folks may have some laying around.

Any ideas?

Thanks in advance!

Thanks,

Scott Hunt
scotthuntemail@gmail.com



Edited 1 time(s). Last edit at 11/06/2018 10:19AM by William Scott Hunt, III.

Options: ReplyQuote
Re: Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by: Matthew Pitrowski (---.lightspeed.milwwi.sbcglobal.net)
Date: November 06, 2018 10:48AM

closest I could find [www.anglersworkshop.com]

The best day to be alive is always tomorrow !!
Think out side the box when all else fails !!!
Wi.

Options: ReplyQuote
Re: Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: November 06, 2018 10:52AM

William, please contact us at 251-943-4491. Ask for Aaron.

Options: ReplyQuote
Re: Trying to find Fuji TMNAT 10(9) and TMNAT 10(10)
Posted by: herb canter (70.40.105.---)
Date: November 06, 2018 11:42AM

I had to order from overseas because nobody around carries the Fuji (TMNTT-F) or (TMNTT-R) in size 8 with a 6 ring which is whats going on both my surf rods. Most everything in size 8 comes with ring sizes that are much too large for my liking like size 8 or 10 ring sizes.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster