I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

WTB VARMAC
Posted by: martin ferral (---.fuse.net)
Date: June 05, 2016 08:29PM

Gentlemen, I need the male ferrule and locking nut for a Varmac #5 reel seat. If, necessary I will buy the complete assembly. My Rod tip was stolen but they neglected to take the handles. Thank you.

Options: ReplyQuote
Re: WTB VARMAC
Posted by: David Parsons (---.c3-0.rdl-ubr2.trpr-rdl.pa.cable.rcn.com)
Date: June 06, 2016 08:59PM

martin what is the size of the #5 ferrule I just bought some from a out of business tackle shop don't know what size 5 is

Options: ReplyQuote
Re: WTB VARMAC
Posted by: martin ferral (---.mycingular.net)
Date: June 07, 2016 12:01AM

If the Reel seat is a Varmac it will be stamped as such on the body and have number and letter stamps as well. For example the one I refer to will be stamped Varmac RS-5H. The female section is approximately 1.075" I.D. I need the male ferrule and the lock nut or the entire assembly. I have a NOS Varmac NF 6H if you want to do a partial trade. Let me know if you can help me out. Best, Mike

Options: ReplyQuote
Re: WTB VARMAC
Posted by: David Parsons (---.c3-0.rdl-ubr2.trpr-rdl.pa.cable.rcn.com)
Date: June 07, 2016 08:10PM

Martin no luck

Options: ReplyQuote
Re: WTB VARMAC
Posted by: Dennis Danku (---.dyn.optonline.net)
Date: June 08, 2016 05:29PM

Martin, I have a complete RS-5H. I'll take the trade if your NF-6H is also complete and in new condition, or $50.00. Breaking up my set would make it useless without the ferrule. You can email me if you like. Thanks, Dennis

Dennis J. Danku
(Sayreville,NJ)

Options: ReplyQuote
Re: WTB VARMAC
Posted by: martin ferral (---.fuse.net)
Date: June 08, 2016 10:59PM

Dennis check your email

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster