SPONSORS
2024 ICRBE EXPO |
Where to find Large Winding Checks
Posted by:
David Ball
(---.ec.res.rr.com)
Date: April 02, 2016 08:05AM
--Hey guys,
I really do not want to build my own winding checks because it looks difficult to do. But I cannot find 22mm or larger winding checks anywhere. I have found them as large as 20. But they have to exist. I seen them on other surf rods with split grips. If I find one then I can actually mold it. Does anyone know if someone sells winding check molds by any chance. Let me know. I can't finish my wife's surf rod till i find , or make an appropriate winding check. Thanks David Re: Where to find Large Winding Checks
Posted by:
Ken Preston
(---.opera-mini.net)
Date: April 02, 2016 09:04AM
David -
Not really that difficult. Build up a 'thread ramp" from the foregrip as far out as you like on the rod blank (toward the tip). You can overwrap several layers of thread (even put in some nice trim bands) - when done epoxy just like a guide. You don't have to repeatedly cut the thread - you can "wrap it backwards" == just like a mistaken overwrap on a guide. Edited 1 time(s). Last edit at 04/02/2016 09:06AM by Ken Preston. Re: Where to find Large Winding Checks
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 02, 2016 12:22PM
[www.fishpacbay.com]
If you look in the pac bay catalog, they have salt water winding checks in sizes up to 31.5mm If you look in the Alps catalog, they also have winding checks in sizes up to 28mm. Check with vendors who carry Pac Bay and or Batson - Alps products. Be safe Re: Where to find Large Winding Checks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 02, 2016 01:15PM
And pick up several catalogs Sounds like you can use them Bill - willierods.com Re: Where to find Large Winding Checks
Posted by:
David Ball
(---.ec.res.rr.com)
Date: April 02, 2016 02:15PM
I should have been more clear. I can find rubber winding checks, what I need is plastic winding checks or metal. I am considering making my own molds but sounds like alot of head ache Re: Where to find Large Winding Checks
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 02, 2016 04:11PM
Alps has large metal winding checks. Re: Where to find Large Winding Checks
Posted by:
Bill Sidney
(---.gci.net)
Date: April 02, 2016 05:43PM
PS if you can't find just what you want try the local Machine an ask what will it cost
just an idea William Sidney AK Re: Where to find Large Winding Checks
Posted by:
Bill Sidney
(---.gci.net)
Date: April 02, 2016 06:02PM
call the different jobbers some times they have items that is not listed [ don't sell much ] an ask them the largest I found was 17 mm in metal
Anglers work shop , silver . you should look for jobbers that deal with salt water rods BIG surf casting or boat rods tuner they might help William Sidney AK Re: Where to find Large Winding Checks
Posted by:
Herb Ladenheim
(---.lightspeed.wepbfl.sbcglobal.net)
Date: April 02, 2016 06:07PM
REC has them in much larger sizes than that.
Herb Re: Where to find Large Winding Checks
Posted by:
David Ball
(---.ec.res.rr.com)
Date: April 02, 2016 07:38PM Re: Where to find Large Winding Checks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 02, 2016 09:20PM
This is for your wife -- Get a nice acrylic block and make your own
Seems you will not fin any of the size you want ---- So Bill - willierods.com Re: Where to find Large Winding Checks
Posted by:
Herb Ladenheim
(---.lightspeed.wepbfl.sbcglobal.net)
Date: April 02, 2016 10:02PM
David,
I'M sorry - I'm thinking 64ths Re: Where to find Large Winding Checks
Posted by:
Bill Sidney
(---.gci.net)
Date: April 03, 2016 01:19AM
Mudhole has them to size 20 .788 inch on paper not on the web William Sidney AK Re: Where to find Large Winding Checks
Posted by:
Mud Hole Custom Tackle
(---.res.bhn.net)
Date: April 03, 2016 12:33PM
Up to 24.1mm -but they are thin winding checks:
[www.mudhole.com] Up to 20mm - thicker ones [www.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: Where to find Large Winding Checks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 03, 2016 06:51PM
he does not want Rubber
Seems he will HAVE TO make them or have some one make them for him There are acrylic blocks that are 1 1/2" in size to make large ones -- If he has a lath Bill - willierods.com Edited 2 time(s). Last edit at 04/03/2016 06:55PM by bill boettcher. Re: Where to find Large Winding Checks
Posted by:
David Ball
(---.ec.res.rr.com)
Date: April 03, 2016 10:43PM
Its ok guys I just went out and bot some casting resin. Going to chop some eva foam winding checks to make the mold. Re: Where to find Large Winding Checks
Posted by:
Lou Auret
(204.16.161.---)
Date: April 05, 2016 02:16PM
If you are having trouble with the mold, and you have access to a real lathe(not a rod building one) carbide tools cut aluminum readily and you can shape exactly what you want. You could cast from that or use as is or make it slightly larger and powder coat it. Edited 1 time(s). Last edit at 04/05/2016 02:18PM by Lou Auret. Sorry, only registered users may post in this forum.
|