SPONSORS
2024 ICRBE EXPO |
Light bulb for heating epoxy?
Posted by:
Marc A. Morrone
(---.dsl.airstreamcomm.net)
Date: March 08, 2016 11:39AM
I use the larger kits of finish and glue, and am wondering if you guys use a regular light bulb to heat finish, or a lower power heat lamp style? Re: Light bulb for heating epoxy?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 08, 2016 12:20PM
I just set the epoxy on a stool in front of my space heater. Re: Light bulb for heating epoxy?
Posted by:
Roger Pascual
(---.statefarm.com)
Date: March 08, 2016 12:42PM
just purchase a cheap candle jar warmer. Its quick and effective. Re: Light bulb for heating epoxy?
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: March 08, 2016 12:47PM
Regular bulb Re: Light bulb for heating epoxy?
Posted by:
John E Powell
(---.dynamic.wnyric.org)
Date: March 08, 2016 01:14PM
Comments deleted Edited 1 time(s). Last edit at 09/20/2016 04:55PM by John E Powell. Re: Light bulb for heating epoxy?
Posted by:
Chester Kiekhafer
(---.client.mchsi.com)
Date: March 08, 2016 01:19PM
I used a candle warmer once and that was the last time. The time got away from me and I found the plastic bottle had start to melt and epoxy was all over the place. I now just set them in from a small heater during the winter months or I nuke them during the summer months if need be ( actually spring and fall). Re: Light bulb for heating epoxy?
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: March 08, 2016 02:18PM
Hello Marc.
I just put the bottles in real hot water, wipe off the water and pour. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Light bulb for heating epoxy?
Posted by:
Nate Nelson
(107.77.87.---)
Date: March 08, 2016 02:32PM
X2 with hot water. Works great and is very simple. I've also used my space heater but have found the water warms the epoxy more evenly. Re: Light bulb for heating epoxy?
Posted by:
Alistair Mangion
(---.access.maltanet.net)
Date: March 08, 2016 02:37PM
Heat lamp is better for the job. Be careful not to over do it. 25 W at the right height should be enough. Re: Light bulb for heating epoxy?
Posted by:
Tom Kirkman
(Moderator)
Date: March 08, 2016 04:55PM
Store it inside your home somewhere. That way you shouldn't ever need to heat it.
................. Re: Light bulb for heating epoxy?
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 08, 2016 05:19PM
If your place is at least 60 - 70 degrees why do you want to heat it
If you are using high build and want to thin it - Use a light finish Bill - willierods.com Re: Light bulb for heating epoxy?
Posted by:
gabriele schieda
(---.google.com)
Date: March 08, 2016 06:52PM
I only heat my epoxy when I see the white crystals in the bottles. I just mix and apply. Re: Light bulb for heating epoxy?
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: March 09, 2016 07:02AM
my rod shop is heated to 70-71 deg. - finish seems a little thick at that temp. Do you guys just use it at room temp? I know it pulls a lot nicer into the syringes, with less bubbles when warmer. Thanks - Marc Keep it simple - that's all I can handle! Re: Light bulb for heating epoxy?
Posted by:
Tom Kirkman
(Moderator)
Date: March 09, 2016 07:58AM
That's not considered cold by any means, although having the epoxy at closer to 75F does make it handle a bit more easily for measuring and mixing.
..................... Re: Light bulb for heating epoxy?
Posted by:
gabriele schieda
(---.google.com)
Date: March 09, 2016 09:03PM
I find that I applying a bit thicker and use a little heat on the wrap and it thins out Nicely Re: Light bulb for heating epoxy?
Posted by:
John Shear
(198.135.125.---)
Date: March 11, 2016 01:38PM
My basement (woodworking) shop is between 65 and 68 degrees. As a novice my first experience with epoxy was frustrating, but I tried several brands and found one that works really well in my environment. Plenty thin enough to go on easily, plenty of pot life since I work slow, and bubbles release easily by blowing on them. While I will warm part A & B before mixing, I never apply heat after mixing or applying. Perhaps you're limiting yourself by not trying other finishes, especially the lite finishes. Each finish has it's own personality and behaves different than others. John Shear Chippewa Falls, WI Sorry, only registered users may post in this forum.
|