SPONSORS
2024 ICRBE EXPO |
Stabilizing wood or bone
Posted by:
ray balmforth
(120.152.33.---)
Date: February 24, 2016 10:49PM
Just wondering if anybody has done any stabilizing of woods,bone or animal horns etc. I am looking at doing something like this to make trim parts and winding checks.
I haven't been using any of these on my builds for quite a while as IMO the metal doesn't complement the cork grips i make.So just wondering if anyone has experimented with doing there own stabilizing and what sort of results they have achieved and any issues with wear and moisture penetration etc. Especially interested in bone and horns and what type they have used.Also if they have used colours to impregnate what type of dyes they used.Appreciate any responses in advance cheers Ray Balmforth Figtree NSW Australia Re: Stabilizing wood or bone
Posted by:
Travis Thompson
(---.hsd1.il.comcast.net)
Date: February 24, 2016 11:46PM
I was actually just watching you tube videos today about stabilizing wood. Its very simple and if I needed some Id prob do it myself bc thats just how I am Re: Stabilizing wood or bone
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: February 25, 2016 10:58AM
Most bone and horn do not need stabilizing. I turn quite a bit of Stag and Buffalo horn for the same purpose you mention. Re: Stabilizing wood or bone
Posted by:
Steve Hartzell
(---.hfc.comcastbusiness.net)
Date: February 25, 2016 12:56PM
I've done wood stabilization. Here's what I use and it works quite well. [www.turntex.com]
I'll post some pics in a while to show an example. Steve Hartzell Lake Conroe - Willis, Texas Re: Stabilizing wood or bone
Posted by:
John E Powell
(---.dynamic.wnyric.org)
Date: February 25, 2016 01:13PM
Comments deleted Edited 1 time(s). Last edit at 09/20/2016 04:58PM by John E Powell. Re: Stabilizing wood or bone
Posted by:
Steve Hartzell
(---.hfc.comcastbusiness.net)
Date: February 25, 2016 03:00PM
Here is a spalted Tamarind and Birch Bark handle I did using the Cactus Juice resin. I stabilized the Tamarind which was pretty soft to begin with.
[www.rodbuilding.org] [www.rodbuilding.org] Steve Hartzell Lake Conroe - Willis, Texas Re: Stabilizing wood or bone
Posted by:
ray balmforth
(120.152.33.---)
Date: February 26, 2016 04:33PM
Thank you for your replies.Phil interested to know if you apply any finish to your work or do you just leave it natural.What type of tool are you using to take material off with ?
Steve very lovely work i have seen the product on the net are you using a home made vacumn or a store bought model. Does anybody work with any other types of bone. cheers Ray Balmforth Figtree NSW Australia Re: Stabilizing wood or bone
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: February 26, 2016 08:13PM
Ray, to answer your questions, yes I apply one coat of TruOil to the horn material. I use my normal wood turning tools, gouges, parting tool, etc. The Buffalo and Stag horn turn down more slowly than wood as you cannot take as deep of bites. The materials also sand more slowly, but can achieve a very nice surface finish with 400/600 grit sandpaper. I wet sand the 600.
I will send you by email a photo of one grip I did with Stag Horn ends where I did some Scrimshaw images of flies. Edited 1 time(s). Last edit at 02/28/2016 11:52AM by Phil Erickson. Re: Stabilizing wood or bone
Posted by:
Bill Sidney
(---.gci.net)
Date: February 27, 2016 05:02PM
give us a look at what you did please William Sidney AK Re: Stabilizing wood or bone
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: February 27, 2016 09:40PM
In response I have just posted a few photos in the "grips & handles" gallery. Re: Stabilizing wood or bone
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: February 28, 2016 05:23AM
Wow super nice!
Curt Sorry, only registered users may post in this forum.
|