SPONSORS
2024 ICRBE EXPO |
Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
gregory jones
(---.triad.res.rr.com)
Date: July 07, 2014 12:06PM
Good luck with it. If you have anymore questions about it, let me know. Glad to help
Greg Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Bill Sidney
(---.gci.net)
Date: July 07, 2014 12:35PM
just a note most RC plane shops have the wire in 3 FT sections , I used an old HACK SAW BLADE an a gude glued to the top an tape on the teeth edge [ so it will not cut my thread ] William Sidney AK Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Bill Sidney
(---.gci.net)
Date: July 07, 2014 12:35PM
just a note most RC plane shops have the wire in 3 FT sections , I used an old HACK SAW BLADE an a gude glued to the top an tape on the teeth edge [ so it will not cut my thread ] William Sidney AK Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Bill Sidney
(---.gci.net)
Date: July 07, 2014 12:35PM
just a note most RC plane shops have the wire in 3 FT sections , I used an old HACK SAW BLADE an a gude glued to the top an tape on the teeth edge [ so it will not cut my thread ] William Sidney AK Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Kevin Goy
(---.slb.com)
Date: July 07, 2014 01:16PM
Chuck,
Much appreciated... Would love to see photos of your mods! Kevin Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Chuck Mills
(---.mpls.qwest.net)
Date: July 10, 2014 03:03PM
Kevin - Here you go. I was going to email them to you but your email is hidden.
[www.rodbuilding.org] [www.rodbuilding.org] [www.rodbuilding.org] _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Ken Preston
(---.hsd1.md.comcast.net)
Date: July 10, 2014 03:47PM
Chuck -
Quire ingenious... BRAVO! Re: Thread Tension Spring Rod Modification for American Tackle Power Wrapper?
Posted by:
Steven Barstis
(---.desm.qwest.net)
Date: April 22, 2020 11:08PM
Do you have any pictures of your modification ?? It’s never a bad day when your fishing with a rod you built ! Sorry, only registered users may post in this forum.
|