SPONSORS
2024 ICRBE EXPO |
Check This Out...
Posted by:
John Cates
(---.sub-70-195-198.myvzw.com)
Date: July 01, 2014 02:51PM
Click the link below to watch the new short video from Flex Coat
[www.youtube.com] Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Check This Out...
Posted by:
Chuck Mills
(---.grenergy.com)
Date: July 01, 2014 03:08PM
Cool! Thanks! My slip clutch came with a small hole and now I know how to customize it easily! _________________________________________ "Angling is extremely time consuming. That's sort of the whole point." - Thomas McGuane Re: Check This Out...
Posted by:
Chester Kiekhafer
(---.client.mchsi.com)
Date: July 01, 2014 05:37PM
I wish I new about that before I cut mine.
How do I order a new diaphragm John? I also fine that when I use it with EVA Foam that the foam gets deformed from the pressure exerted by the diaphragm. Has anyone else had this problem? Nice video! Chester May your line be tight and your beverages be cold! Re: Check This Out...
Posted by:
John Cates
(---.sub-70-195-202.myvzw.com)
Date: July 02, 2014 10:49AM
Chester
Give us a call about the diaphragm 512-858-7742 It sounds like it is too tight on the EVA. However, EVA is pretty resilient and should bounce back into shape easily. Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Check This Out...
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: July 05, 2014 10:51PM
Great video John. Very helpful, I was wondering if you made a larger diameter diaphragm but now see how easy it is to make it.
Chester Try wrapping the EVA several times around with 1 inch blue painters tape first. It will eliminate the rings in the EVA made by the diaphragm Tom Sorry, only registered users may post in this forum.
|