SPONSORS
2024 ICRBE EXPO |
Rod Details
Posted by:
Rod Churchward
(---.lns20.bne1.internode.on.net)
Date: June 07, 2014 03:17PM
Hi Folks,
I have been handed a Sportfisher Ocean Side BT72 PG heavy Graphite manufactured in USA Rod for a rebuild. The Rod is brown in colour with yellow painted underwrap, wooden handle, guides are the heavy boat type without rings and a roller tip with reinforcing stays. There is a cord wrap of roughly five inches forward of the forgrip. It is a " it was Dads, do what you can" situation. The decal is fairly moth eaten, I suppose it would be beyond the realms of possibility if anyone knows if a replacement decal exists. Any information on the rod would be greatly appreciated. Kind regards, Rod, Mboro. Qld. Australia. Re: Rod Details
Posted by:
Michael Danek
(---.mskg.mi.frontiernet.net)
Date: June 07, 2014 06:29PM
Do a google images search for "sportfisher oceanside rod" and you should come up with a cursive simple decal that looks like it would be pretty easy to make. Is this the decal that is on the rod? Re: Rod Details
Posted by:
Rod Churchward
(---.lns20.bne4.internode.on.net)
Date: June 07, 2014 07:45PM
Hi Michael,
Thank you for your reply, yes that is the one I had found, but could not track down any other information such as line weight etc. Kind regards, Rod, Mboro. Qld. Australia. Re: Rod Details
Posted by:
Michael Danek
(---.mskg.mi.frontiernet.net)
Date: June 07, 2014 09:16PM
It would not be truly legit, but I don't think it would be hard to at least put that logo together for
a decal to add to the rod if you wanted to. I think you can see my email address. Sorry, only registered users may post in this forum.
|