SPONSORS
2024 ICRBE EXPO |
Adhesive on Dreamreamer
Posted by:
John Samuels
(---.hsd1.va.comcast.net)
Date: April 16, 2014 07:12AM
What adhesive have you guys been using to replace the sandpaper tape on the dream reamer? Re: Adhesive on Dreamreamer
Posted by:
Zachary Kowasz
(---.stny.res.rr.com)
Date: April 16, 2014 07:45AM
When I make my own I use contact cement. Re: Adhesive on Dreamreamer
Posted by:
Mike Adams
(---.dhcp.knwc.wa.charter.com)
Date: April 16, 2014 02:11PM
Contact cement here too. Less mess with CC. Used rod bond the first time, which worked fine but had it up my elbows by the time I was done. I can be clumsy at times. Re: Adhesive on Dreamreamer
Posted by:
Mike Adams
(---.dhcp.knwc.wa.charter.com)
Date: April 16, 2014 02:11PM
Contact cement here too. Less mess with CC. Used rod bond the first time, which worked fine but had it up my elbows by the time I was done. I can be clumsy at times. Re: Adhesive on Dreamreamer
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 16, 2014 02:33PM
When I made mine I mixed the rod bond and then with a folded paper towel wiped it on the scrap Only needed a thin coat Bill - willierods.com Sorry, only registered users may post in this forum.
|