SPONSORS
2025 ICRBE |
Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: April 15, 2014 10:08AM
Hello Everyone.
Because no one answered my query about what, when... I have decided to end this attempt at a gathering. Thanks Tom for your offer to have it at your place. At least it saves me a 4hr trip. Tight Wraps. Bob, New Bern, NC. Edited 1 time(s). Last edit at 04/15/2014 10:11AM by Robert A. Guist. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Tom Kirkman
(Moderator)
Date: April 15, 2014 10:32AM
Sorry to hear it, but with the Expo so close and so recent, it's tough to do anything else around here.
.................... Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
David Miller
(---.sub-174-252-179.myvzw.com)
Date: April 15, 2014 11:34AM
I have been busy lately and forgot to send my email to you Bob, I will send it to you. Hopefully we can round up enough folks for a meeting in July or August after people get over Spring Fever and far enough time away from the expo. I should have at least one surf rod done by then that I can bring for construstive critisism for future builds.
Thanks, Dave Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Chris E Linville
(---.dhcp.embarqhsd.net)
Date: April 15, 2014 02:39PM
Bob, I haven't been on here in a while so I didn't see your post until today, but I would love to have a gathering around here. I will do anything I can to help. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: April 15, 2014 05:32PM
Bob, I had 6 NERBs from NC that were serious about attending as they've been to ICRBE's and to other NERBs gatherings when Chuck PAyne held them. And another guy has been doing classes in NC and he said he would have no problem getting several of his past students to attend. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: April 16, 2014 08:57PM
Robert I too apologize for not responding!
I took a short fall off a tall latter last month. Fracturing my pelvis, elbow, and wrest. and have been kind of out of it lately. Not really responding to anything. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: April 17, 2014 11:39AM
Hello All
If there becomes enough local interest someone will pull a gathering together, I live 4hrs from High Point on the coast and cannot rally together any kind of a showing from here so when someone from your area gets the urge and puts one together let me know, I may find a way to do one on the coast. Sorry to hear about the fall Steve (wasn't on your casting side was it?), at least you didn't hurt the thumb again, good luck with the pelvis thing, I understand that that can be very painful. Tight Wraps. Bob, New Bern, NC. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: April 17, 2014 06:19PM
Yes was casting side, writing side, eating side, do everything side. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: April 18, 2014 06:46AM
Hello Steve.
That Bites. Hope you get well soon. Tight Wraps. Bob, New Bern, NC. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Wes Motsinger
(---.triad.res.rr.com)
Date: April 19, 2014 10:12PM
Hey Robert I sent you a email when you first came up with this. Never got a response. I just emailed you again. Check and see if you got it. Re: Re-Re: Rodbuilding Gathering in High Point?
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: April 20, 2014 09:40PM
Hello Wes.
No I did not get it, but if it is about the gathering, it has been canceled. Tight Wraps. Bob, New Bern, NC. Sorry, only registered users may post in this forum.
|