SPONSORS
2024 ICRBE EXPO |
weird old guildes - removal help?
Posted by:
Bryon Anderson
(---.dsl.klmzmi.sbcglobal.net)
Date: January 01, 2014 12:33PM
Please see edited post below. Edited 1 time(s). Last edit at 01/01/2014 12:41PM by Bryon Anderson. Re: weird old guildes - removal help?
Posted by:
Bryon Anderson
(---.dsl.klmzmi.sbcglobal.net)
Date: January 01, 2014 12:40PM
I need some help removing some very odd guides from an old spincasting rod. Where the "feet" would be on a modern guide, these have metal windings that appear to be wound around the blank itself. They actually look like springs. These spring-like things hold tight to the blank, and appear to hold the guide onto the blank, as there are no thread wraps over them. If anyone is familiar with what I'm describing, is there a way to remove these things without ruining the blank? These guides are on a very old spincasting rod of my late father's. I am toying with the idea of stripping everything off, cleaning it up and making it into a short fly rod.
I took some pics, but I can't see a way here to add pics to a post. I can email a pic to anyone who'd like to see what I'm talking about, if that would help. Any help would be appreciated. Thanks! Re: weird old guildes - removal help?
Posted by:
Don Morse
(---.dhcp.bycy.mi.charter.com)
Date: January 01, 2014 12:57PM
I had one come in like that years ago ....I cut them off. ______________________________________ Super Tight Lines......Don Re: weird old guildes - removal help?
Posted by:
Tom Kirkman
(Moderator)
Date: January 01, 2014 01:07PM
Yes, you have to cut them off. The trick is redoing the guides with the same type wire windings. Very, very difficult to do.
........... Re: weird old guildes - removal help?
Posted by:
Bryon Anderson
(---.dsl.klmzmi.sbcglobal.net)
Date: January 01, 2014 01:22PM
Thanks, guys. I was afraid of that, but I do have a Dremel so it's just a matter being careful I guess. I did upload a photo of one of the guides on the photo site. Search under my username Bryon Keith Anderson to see.
What I want is just to get them off of there with no damage to the blank so I can replace them with light wire snake guides with normal thread wraps. I'll post photos of the finished rod if I manage to pull it off. Edited 1 time(s). Last edit at 01/01/2014 01:23PM by Bryon Anderson. Re: weird old guildes - removal help?
Posted by:
Tom Kirkman
(Moderator)
Date: January 01, 2014 03:05PM
Cut on top of the guide foot. You only need to snip or cut one wire strand, then just unwind is as you would a thread wrap.
........... Re: weird old guildes - removal help?
Posted by:
andi robb
(---.phnx.qwest.net)
Date: January 01, 2014 03:35PM
I had some of these to do the other week. I snipped the eye off then carefully unwound with pliers (just cos it hurt my fingers) if you loosen them so they turn you can slip them off the top of the rod. They leave groves in the blank though so I marked out the length of the new eye on the blank and put some finish direct onto the rod (just like i would a finished guide) and this filled in the groves nicely.
Andi Re: weird old guildes - removal help?
Posted by:
Bryon Anderson
(---.dsl.klmzmi.sbcglobal.net)
Date: January 01, 2014 07:12PM
Tom Kirkman Wrote:
------------------------------------------------------- > Cut on top of the guide foot. You only need to > snip or cut one wire strand, then just unwind is > as you would a thread wrap. > > ........... Thanks Tom - glad to know they will come off easily. Re: weird old guildes - removal help?
Posted by:
mike johnson
(---.dhcp.unas.wa.charter.com)
Date: January 26, 2014 11:52AM
could this be a colectable rod? Sorry, only registered users may post in this forum.
|