SPONSORS
2024 ICRBE EXPO |
wax remover
Posted by:
Lindsay PELLETIER
(---.w86-221.abo.wanadoo.fr)
Date: August 20, 2013 06:38AM
Hello,
I need to remove some wax on blank, what safe product can I use ? I have try alcohol and hot soap water without result. Thanks in advance. Re: wax remover
Posted by:
Sergiy Korniychuk
(24.114.70.---)
Date: August 20, 2013 07:13AM
Do you mean sticky glue residue? If so, simple paper towel soaked in any cooking oil, olive or whatever oil you use in the kitchen, will remove it. Let it stay where the spot is for a minute or so, then just wipe off with the same towel. When removed completely wipe off with dry paper towel, then clean with alcohol. Re: wax remover
Posted by:
Lindsay PELLETIER
(---.w86-221.abo.wanadoo.fr)
Date: August 20, 2013 07:18AM
Thanks, but it's not epoxy residue, the blank have been coated with automotive wax and I want to remove this wax. Edited 1 time(s). Last edit at 08/20/2013 07:19AM by Lindsay PELLETIER. Re: wax remover
Posted by:
Tom Kirkman
(Moderator)
Date: August 20, 2013 08:00AM
Rubbing alcohol should do the trick.
............ Re: wax remover
Posted by:
Lindsay PELLETIER
(---.w86-221.abo.wanadoo.fr)
Date: August 20, 2013 08:11AM
Thanks, but that why I have use, but it will not remove anything. Re: wax remover
Posted by:
Garry Thornton
(24.114.85.---)
Date: August 20, 2013 08:19AM
Auto parts stores sell liquid wax removers.
There is a product by Mother called "Back to Black" for removing auto wax from black plastic trim that should be safe for a rod blanks. You can use the leftovers to detail your vehicle...grin. Re: wax remover
Posted by:
Terry Kirk
(---.co.shawnee.ks.us)
Date: August 20, 2013 09:11AM
try some goo-gone on it. Re: wax remover
Posted by:
John DeMartini
(12.54.94.---)
Date: August 20, 2013 09:32AM
Toluene is an excellent solvent for removing slilcones. However, Touelene is toxic and flammable and should be handled with care and with proper personal protection, gloves, goggles,etc. and used in a well ventilated area. All chemicals or solvents have a potential danger. Read, understand and follow the Material Safety Data Sheet (MSDS) before using ANY chemical or solvent.
Also, before using any solvent, apply a little to an area that will be hidden to make sure the solvent does not react or cause damage to the finish. Re: wax remover
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 20, 2013 11:12AM
Toulene, Acetone, Xylene will all work well for this purpose.
It is best to do this work out of doors with a wind blowing so you don't inhale any fumes. These chemicals work well but are quite toxic. Be safe Re: wax remover
Posted by:
Steve Wright
(---.hsd1.wa.comcast.net)
Date: August 20, 2013 11:19AM
You might try a plain white vinegar. Was used long ago buy the car guys to remove wax before they reapplied. Re: wax remover
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: August 20, 2013 01:18PM
Go get some Goof Off at Lowes or Home Depot. Non Toxic and works on many types of products, and wont hurt the finish of your blank. Re: wax remover
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 20, 2013 01:29PM
Randolph,
Actually - Goof Off is not quite - Non Toxic. Basically it is 90% xylene. Here is the product data sheet for Goof OFF. [hpd.nlm.nih.gov] By the way, I use it all of the time and it is a great product. But, it is quite toxic and should only be used in a well ventilated area. Be safe Re: wax remover
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: August 20, 2013 02:01PM
Roger you are absolutely correct!! I know it is toxic, it says so right on the container. I had a brain fart there. I only meant to say it is not harmful to most finishes. Thanks for correcting my mistake. :>) Re: wax remover
Posted by:
Lindsay PELLETIER
(---.w86-221.abo.wanadoo.fr)
Date: August 20, 2013 04:44PM
I have just try white vinegar, he has no effect on the wax.
I have also try acetone (just a on old scrap blank because I don't want use this thing on the "good" blank) and even if I am very nervous about using acetone on blanks, he have also absolutely no effect on the wax. I not enjoy the idea about using very strong solvent such as xylene or powerful product such as car wax remover. If everyone know a product what I can use indoor without respirator, or too strong for a carbon blank, please let me know. Thanks for your help. Edited 1 time(s). Last edit at 08/20/2013 04:46PM by Lindsay PELLETIER. Re: wax remover
Posted by:
John Shear
(---.sgi.com)
Date: August 20, 2013 04:58PM
In the woodworking world, we use mineral spirits.
John Re: wax remover
Posted by:
Lindsay PELLETIER
(---.w86-221.abo.wanadoo.fr)
Date: August 20, 2013 05:09PM
Thanks, soon I have see your answer, I have try a product we call in France "White Spirit" (I assume it's similar that mineral spirits ???), but is has no effect on the wax. Re: wax remover
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: August 20, 2013 05:45PM
Lavez avec eau tres chaud!! Re: wax remover
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: August 20, 2013 06:33PM
Oui! Re: wax remover
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: August 20, 2013 07:04PM
Terry Kirk(Goo-Gone) and Roger Wilson (bubble gum wax remover spray) seem like the most likely solutions.
Good luck "It ain't what you don't know that gets you into trouble.It's what you know for sure that just ain't so." Mark Twain John in Wethersfield, CT Sorry, only registered users may post in this forum.
|