SPONSORS
2024 ICRBE EXPO |
Seeker BS706S Paint?
Posted by:
Wes Motsinger
(---.triad.res.rr.com)
Date: August 03, 2013 04:41PM
Are these blanks painted all the way or do they stop before the butt? Going to build a cranking split grip and need it finished all the way down. Re: Seeker BS706S Paint?
Posted by:
Tom Kirkman
(Moderator)
Date: August 03, 2013 06:28PM
I've seen them both ways. Most aren't painted all the way to the butt in my experience, with about 4 inches or so left unfinished at the butt.
............ Re: Seeker BS706S Paint?
Posted by:
Jim Upton
(---.sub-70-197-73.myvzw.com)
Date: August 03, 2013 07:00PM
.Clear coat it with Epoxy it will look the same as the rest of the blank. Re: Seeker BS706S Paint?
Posted by:
Scott Hovanec
(---.sub-70-199-1.myvzw.com)
Date: August 03, 2013 07:10PM
Mine is unfinished for about the last 5" Re: Seeker BS706S Paint?
Posted by:
Wes Motsinger
(---.triad.res.rr.com)
Date: August 04, 2013 10:07AM
thanks guys for the answers. Re: Seeker BS706S Paint?
Posted by:
mike harris
(---.static.hlrg.nc.charter.com)
Date: August 07, 2013 03:13PM
Swampland has them completely unfinished, make a much nicer rod. Sorry, only registered users may post in this forum.
|