SPONSORS
2024 ICRBE EXPO |
to renew my RODMAKER
Posted by:
Bill Sidney
(---.gci.net)
Date: June 26, 2013 12:36PM
where do I get the information on where an how do I renew the RODMAKER an cost ????????????????? William Sidney AK Re: to renew my RODMAKER
Posted by:
Tom Kirkman
(Moderator)
Date: June 26, 2013 01:13PM
It's in every issue you receive, or you can click the RodMaker link to the left in the sponsor column and get it right off the magazine website.
............. Re: to renew my RODMAKER
Posted by:
Bill Sidney
(---.gci.net)
Date: June 27, 2013 12:56AM
I found it inmy issue I just recived My eye's are not so good it was hard to read the black on red sorry thanks TOM William Sidney AK Re: to renew my RODMAKER
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: June 27, 2013 06:55PM
Can we get this in Canada? The website looks like it only is offered in the US, Australia and Europe. Re: to renew my RODMAKER
Posted by:
Tom Kirkman
(Moderator)
Date: June 27, 2013 07:45PM
I only offer it in the USA due to problems with customs and the required time involved.
There are resellers in both Australia and Europe. There have been no less than 3 resellers in Canada to date, but none have proven to deliver the product as they promised to their customers. None, including those in Australia and Europe, are affiliated with RodMaker Magazine in any way. .......... Re: to renew my RODMAKER
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: June 27, 2013 08:16PM
Hi Tom,
Could you not simply mail me a copy if I pay you shipping and cost of magazine in advance? Re: to renew my RODMAKER
Posted by:
Tom Kirkman
(Moderator)
Date: June 27, 2013 10:27PM
It's not that simple. To mail a copy to Canada I have to address and fill out a customs form, then hand carry it to the post office where most likely I will stand in line for a bit. I'm not going to go into all the details involved in publishing and mailing a magazine to some 14,000+ people, along with the administrative tasks involved, nor the work involved with the Expo or this forum. Suffice to say, I can't spare an hour or more to mail a single copy to a subscriber outside the USA. I wish I could, but it's simply impossible. There is no staff here.
............... Re: to renew my RODMAKER
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: June 28, 2013 09:55AM
Hi Tom,
Understood. If something ever changes please let me know. Re: to renew my RODMAKER
Posted by:
Joaquim Loureiro
(---.netvisao.pt)
Date: July 12, 2013 06:00PM
If i can help, i can try to send for canada.
i can put in a observations ( catalogue ) and meybe nothing happens. Joaquim Loureiro cork4us.com Sorry, only registered users may post in this forum.
|