SPONSORS
2024 ICRBE EXPO |
Split Grip for American Tackle Aero size 16
Posted by:
Bert Nagy
(---.asm.bellsouth.net)
Date: April 14, 2013 09:49PM
I would appreciate a recommendation for an EVA split grip set that fits the American Tackle Size 16 reel seat.
I have looked all the grips on the sponsors websites, and can't find one that fits into the reel seat. There are a lot of really nice grips for casting reel seats, but not many for spinning reel seats. Most of the straight grips are about 1.00 inches or larger, and the Aero is .98. I tried cutting off the tenon of one, and sanding it down, but that did not work,out so well. I did not like how the sanded part looked compared to the factory finish. IWhat is everyone using? Thanks Bert Nagy Re: Split Grip for American Tackle Aero size 16
Posted by:
Craig Mullins
(---.dhcp.mtgm.al.charter.com)
Date: April 14, 2013 09:56PM
Bert, I know you said EVA, but check out Mike Pederson's carbon fiber grips...it's Riley Rods under the sponsors column. All of his spinning grips are tailored to the Aero seat. Re: Split Grip for American Tackle Aero size 16
Posted by:
Lance Dupre
(---.lightspeed.nworla.sbcglobal.net)
Date: April 14, 2013 10:27PM
Bert here are a few grip assemblies that I stock. Please call or email for more info. Foregrips can be omitted if you want to go with the no foregrip look. The photo on the bottom has a small 3/4'' foregrip.
[www.rodbuilding.org] Lance Re: Split Grip for American Tackle Aero size 16
Posted by:
Mark Newcombe
(---.130-26-211.dynamic.dsl.syd.iprimus.net.au)
Date: April 15, 2013 12:57AM
Cut 20mm off the front of these and they fit perfect.
[www.mudhole.com] Also a kdps hood fits just right i usually cut the tube of the kdps in half and fit an sk2 eva hood makes for a very nice grip Re: Split Grip for American Tackle Aero size 16
Posted by:
Bill Ballou
(---.hsd1.tn.comcast.net)
Date: April 15, 2013 08:56AM
Bert, you can check out some wood grips on my member page. can be made any size if wood is a prefence. Thanks Bill Re: Split Grip for American Tackle Aero size 16
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: April 16, 2013 12:56PM
Bert,
the following seats are designed to fit perfectly into the Aero 16. [www.mudhole.com] Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Edited 1 time(s). Last edit at 04/16/2013 12:56PM by Todd R. Vivian. Sorry, only registered users may post in this forum.
|