Here is something I added to my power wrapper to help keep track where to install trim wraps, especially on the longer butt wraps. I found it on @#$%& $14

Very Nice!

I like it.

It is pretty awesome. Makes my pencil marked note cards look a little neanderthal-ish. LoL

I like it too.

It is called a "LCD Punch Counter Digital 5 Digit including proximity switch and strong magnet ". If you are looking it up.

Mine is on the way.


Tom



Edited 1 time(s). Last edit at 03/12/2013 12:40AM by Tom Wewerka.

Tom,
Thanks for the update. I was searching and coming up blank.
Mine is also on the way.
Roger



Edited 1 time(s). Last edit at 03/12/2013 04:20PM by roger wilson.

Tom Wewerka Wrote:
-------------------------------------------------------
> I like it too.
>
> It is called a "LCD Punch Counter Digital 5 Digit
> including proximity switch and strong magnet ".
> If you are looking it up.
>
> Mine is on the way.
>
>
> Tom

Thanks for the tip. Very cool tool.

BRILLIANT!!!!

roger wilson Wrote:
-------------------------------------------------------
> Tom,
> Thanks for the update. I was searching and coming
> up blank.
> Mine is also on the way.
> Roger


Happy to help out, can hardly wait to install

Sweet
gotta love flea bay

ordered one today it is on the way thanks for the idea it will really help out.
Dale

G'Day Barry It is certainly a better than the hand counter that I have been using .I now have 1 on order thanks for posting it

Regards Baz

Bundeena
NSW Australia

Me too

Bobby Stout
Bloomburg, TX

Had to trim the bracket to get clearence to add it on the drier motor screw... that was the toughest part, and that wasnt tough at all:)
A little twofaced carpet tape on the magnet and your counting....

Jim,
Thanks for the post and the link.
I have received my counter, but unfortunately I have received a defective counter.
Hopefully, the supplier will send me a replacement soon.

Roger

Sorry to hear that Roger. Mine came powered up and ready to go. Luckly I can read the Japaneese instructions....NOT!! Little bracket modification, taped the magnet to the pulley and was counting em off. One thing I did, I have my chucked marked every 90 dgrees. I always use the same line for "0" degrees. I set the magnet at about 10 degrees in advance of the mark reaching "0" degrees since the magnet has to pass the pick up somewhat before it counts a turn. That way it just adds another count as the mark hits top dead center,

I just got mine today....I cannot read the instructions , does it matter which wire goes where?

Never mind figured it out......thanks

If you would like a translation of the instructions that come with the unit, send me an e-mail.



Edited 2 time(s). Last edit at 03/23/2013 05:44PM by John E Powell.