SPONSORS
2024 ICRBE EXPO |
COUNTING THREAD WRAPS
Posted by:
JIM MOWL
(---.dyn.centurytel.net)
Date: March 11, 2013 04:35PM
Here is something I added to my power wrapper to help keep track where to install trim wraps, especially on the longer butt wraps. I found it on @#$%& $14
Re: COUNTING THREAD WRAPS
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: March 11, 2013 06:32PM
Very Nice! Re: COUNTING THREAD WRAPS
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 11, 2013 10:14PM
I like it. Re: COUNTING THREAD WRAPS
Posted by:
Jay Lancaster
(---.hsd1.sc.comcast.net)
Date: March 11, 2013 11:07PM
It is pretty awesome. Makes my pencil marked note cards look a little neanderthal-ish. LoL Re: COUNTING THREAD WRAPS
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: March 12, 2013 12:28AM
I like it too.
It is called a "LCD Punch Counter Digital 5 Digit including proximity switch and strong magnet ". If you are looking it up. Mine is on the way. Tom Edited 1 time(s). Last edit at 03/12/2013 12:40AM by Tom Wewerka. Re: COUNTING THREAD WRAPS
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 12, 2013 01:49AM
Tom,
Thanks for the update. I was searching and coming up blank. Mine is also on the way. Roger Edited 1 time(s). Last edit at 03/12/2013 04:20PM by roger wilson. Re: COUNTING THREAD WRAPS
Posted by:
Craig Mullins
(---.dhcp.mtgm.al.charter.com)
Date: March 12, 2013 07:03AM
Tom Wewerka Wrote:
------------------------------------------------------- > I like it too. > > It is called a "LCD Punch Counter Digital 5 Digit > including proximity switch and strong magnet ". > If you are looking it up. > > Mine is on the way. > > > Tom Thanks for the tip. Very cool tool. Re: COUNTING THREAD WRAPS
Posted by:
Scott Backholm
(---.uscg.mil)
Date: March 12, 2013 01:21PM
BRILLIANT!!!! Re: COUNTING THREAD WRAPS
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: March 12, 2013 05:07PM
roger wilson Wrote:
------------------------------------------------------- > Tom, > Thanks for the update. I was searching and coming > up blank. > Mine is also on the way. > Roger Happy to help out, can hardly wait to install Re: COUNTING THREAD WRAPS
Posted by:
phil-barrows
(---.nwrknj.fios.verizon.net)
Date: March 13, 2013 02:48AM
Sweet
gotta love flea bay Re: COUNTING THREAD WRAPS
Posted by:
Dale Thiel
(---.mpls.qwest.net)
Date: March 13, 2013 07:38PM
ordered one today it is on the way thanks for the idea it will really help out.
Dale Re: COUNTING THREAD WRAPS
Posted by:
Barry Chapman
(---.41.70.115.static.exetel.com.au)
Date: March 13, 2013 08:05PM
G'Day Barry It is certainly a better than the hand counter that I have been using .I now have 1 on order thanks for posting it Regards Baz Bundeena NSW Australia Re: COUNTING THREAD WRAPS
Posted by:
bobby stout
(147.58.99.---)
Date: March 14, 2013 09:36AM
Me too Bobby Stout Bloomburg, TX Re: COUNTING THREAD WRAPS
Posted by:
JIM MOWL
(---.dyn.centurytel.net)
Date: March 19, 2013 04:49PM
Had to trim the bracket to get clearence to add it on the drier motor screw... that was the toughest part, and that wasnt tough at all:)
A little twofaced carpet tape on the magnet and your counting.... Re: COUNTING THREAD WRAPS
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 19, 2013 09:52PM
Jim,
Thanks for the post and the link. I have received my counter, but unfortunately I have received a defective counter. Hopefully, the supplier will send me a replacement soon. Roger Re: COUNTING THREAD WRAPS
Posted by:
JIM MOWL
(---.dyn.centurytel.net)
Date: March 20, 2013 12:50PM
Sorry to hear that Roger. Mine came powered up and ready to go. Luckly I can read the Japaneese instructions....NOT!! Little bracket modification, taped the magnet to the pulley and was counting em off. One thing I did, I have my chucked marked every 90 dgrees. I always use the same line for "0" degrees. I set the magnet at about 10 degrees in advance of the mark reaching "0" degrees since the magnet has to pass the pick up somewhat before it counts a turn. That way it just adds another count as the mark hits top dead center, Re: COUNTING THREAD WRAPS
Posted by:
Harry Kelly
(---.dyn.optonline.net)
Date: March 20, 2013 06:49PM
I just got mine today....I cannot read the instructions , does it matter which wire goes where? Re: COUNTING THREAD WRAPS
Posted by:
Harry Kelly
(---.dyn.optonline.net)
Date: March 21, 2013 03:31PM
Never mind figured it out......thanks Re: COUNTING THREAD WRAPS
Posted by:
John E Powell
(---.buffalo.res.rr.com)
Date: March 23, 2013 03:58PM
If you would like a translation of the instructions that come with the unit, send me an e-mail. Edited 2 time(s). Last edit at 03/23/2013 05:44PM by John E Powell. Sorry, only registered users may post in this forum.
|