SPONSORS
2024 ICRBE EXPO |
Guides for flippin stick
Posted by:
Dan Leitzen
(---.dhcp.roch.mn.charter.com)
Date: January 09, 2013 11:23PM
I am planning on making a pike rod using a MHX FS906 blank. I would like suggestion on guides for this rod. My plan is to use Fuji alconite BLNAG guides. I have been hearing about using micro and fly guides which is something I have never used. Would they work on a rod like this? It is a 7'6" heavy rod. Any suggestion for guides for this rod? This rod will be used for casting only. Re: Guides for flippin stick
Posted by:
Jim Gamble
(---.res.bhn.net)
Date: January 09, 2013 11:40PM
Micro guides will work fine. I would suggest Fuji "K" series or Kigan "Z" series. Both are solid values. Re: Guides for flippin stick
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: January 10, 2013 09:19AM
BKWAG10 (double foot stripper), BKWAG5.5, followed by 5, 4.5 or 4 BKTAG runners. Re: Guides for flippin stick
Posted by:
Jonathan Travers
(---.res.bhn.net)
Date: January 10, 2013 11:26PM
Exactly what Jim said if it's more of a moderate flipping stick i might use 2 or 3 BKWAG's just because i'm paranoid. Re: Guides for flippin stick
Posted by:
Eric Viburs
(---.hsd1.mn.comcast.net)
Date: January 11, 2013 07:59PM
what wrong with a #6 DF followed by your micros? That is the line up for most of mine. Re: Guides for flippin stick
Posted by:
justin keithley
(---.dhcp.aldl.mi.charter.com)
Date: January 14, 2013 11:01PM
i'll second that Eric. Regards, -Justin Re: Guides for flippin stick
Posted by:
Dan Leitzen
(---.mntimn.dedicated.static.tds.net)
Date: January 18, 2013 05:46PM
Hey guys. I just recieved the 4.5 BKTAG guides for this rod as recommended. This is definetly much smaller than I have used before. The blank looks like a bigger diameter than the guides. I just want to verify hat I will still get good casting distance with these guides. Thanks Sorry, only registered users may post in this forum.
|