SPONSORS
2024 ICRBE EXPO |
Removing Decorative Butt Cap that has Pro Paste
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: January 07, 2013 10:58AM
Morning all, quick question. I need to remove a butt cap that I applied with Pro Paste. Will a heat gun work to remove the cap/button?
Thanks! Scott "My biggest fear in life is that when I die, my wife will sell my fishing gear for what I said I paid for it." Re: Removing Decorative Butt Cap that has Pro Paste
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: January 07, 2013 11:14AM
Not sure if your butt cap is metal, but if yes, then a heat gun used gently works fine. If it isn't metal, you might consider going the boiling route. Put the end in a zip lock and immerse in boiling water for 10-15 minutes. The sooner you do it, the easier it will be to remove.
Terry Re: Removing Decorative Butt Cap that has Pro Paste
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: January 07, 2013 11:51AM
Thanks Terry. It is metal and has been on a few months at least so you will prob go the heat gun route.
Thanks again! Re: Removing Decorative Butt Cap that has Pro Paste
Posted by:
Billy Vivona
(---.dyn.optonline.net)
Date: January 07, 2013 01:44PM
Now is a good time to see how well you glued it up. Heat gun is wha ti'd do. What did you use for an arbor? I've had gimbals glued to teh FC arbors so tightly that teh glue loosened on teh blank and teh entire gimbal came off with the arbor still inside. Re: Removing Decorative Butt Cap that has Pro Paste
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: January 07, 2013 03:24PM
Thanks Billy. Its just the butt cap i need to take off so no arbor involved. Its a wood handle rod and like an idiot i put the cap on and need to sand it some more so i need to put like and old piece of rod on there so i can sand the whole piece on the rod lathe. Re: Removing Decorative Butt Cap that has Pro Paste
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: January 07, 2013 04:18PM
Popped off after a few mins with the heat gun, thanks guys. "My biggest fear in life is that when I die, my wife will sell my fishing gear for what I said I paid for it." Sorry, only registered users may post in this forum.
|