SPONSORS
2024 ICRBE EXPO |
4 oz pro spool adapter for Clemens or renzetti.
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: September 23, 2012 06:00PM
Did either company make an adapter to use the 4oz spools. I have a Clemens and need some way to use the large spools. Any ideas?? Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Ken Finch
(---.)
Date: September 23, 2012 06:03PM
Renzetti made one. I'm sure because I bought one a few years ago. Cannot say for sure if they still offer them. Have you checked their website? Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 23, 2012 08:22PM
The 4 oz spools are designed to feed from the top of the spool. Thread should not be pulled off the side of the spool.
When I need to use a larger spool, I use this adapter, which I made from a board, a piece of blank and a coat hanger. Then, feed from the lower loop and feed it to the current tension device on your wrapper. [www.rodbuilding.org] Roger Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: September 23, 2012 08:47PM
I did check the website and did a search on here. Roger, I was thinking of making my own to adapt to my Clemens. Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: September 23, 2012 09:02PM
Hi,
I have the 8 spool Clemens carriage. The 2 lower shafts I have adjusted on for 5 1/2 " spool and the other for 3 1/2" spools. It works, maybe not perfect but I use them all the time for black thread. Capt Neil Faulkner Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Andrew McDermott
(---.hsd1.ma.comcast.net)
Date: September 23, 2012 11:40PM
Both companies did at one point make a four ounce thread carriage. They were different designs by both manufacturers. Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: September 24, 2012 03:41AM Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: September 24, 2012 07:58AM
Thank you Barry, I just ordered one to give it a try. Always like to try something new or different. Getting those big spools off my thread carriage will make it much lighter to mopve. Capt Neil Faulkner Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
kevin knox
(---.baybroadband.net)
Date: September 24, 2012 09:06AM
Just load small spools with the thread and put it on the smaller thread carriage. Kevin Knox ANGLER'S ENVY CUSTOM RODS QUEEN ANNE, MD 21657 #_#_#_#_# www.anglersenvy.com Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 24, 2012 09:50AM
Here are a few examples of commercial thread stands that are commonly used by users of industrial sewing machines:
[www.amazon.com] [www.aliexpress.com] [www.alibaba.com] [www.google.com] [www.youtube.com] [www.youtube.com] Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Bill Marchisella
(---.nycmny.fios.verizon.net)
Date: September 24, 2012 04:41PM
John I took a 100yd. empty spool cut it in half and inserted both ends of 4oz spool Then adjusted the carriage for extra Length iIf you like me to post Photo I will Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: September 24, 2012 04:44PM
kevin knox Wrote:
------------------------------------------------------- > Just load small spools with the thread and put it > on the smaller thread carriage. I have been and it is a hugh pia.. I'm way to busy to mess with it anymore! I want to just use the large spools since I only use three colors mostly and it's ramping to large production. I have a buddy who is a machinist and now I know what I'm looking for I'll have him make it to hold three spools off the Clemens base I already have.. looks simple!! Thanks guys Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 24, 2012 05:34PM
John,
When you get it finished and installed, take a picture and please post it. REW Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: September 24, 2012 07:14PM
Roger, Photos. No problem. Now Bill that sounds intresting!! I have now found that the one Pro Wrap color I use doesn't come in the 4oz spool so... I might just need a two spool since the other colors are Guberod!! Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Bill Marchisella
(---.nycmny.fios.verizon.net)
Date: September 25, 2012 06:57PM
Photo in the photo page Re: 4 oz pro spool adapter for Clemens or renzetti.
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: September 26, 2012 02:53PM
Hi Barry,
The All Stich thread stand arrived today. For a few bucks it works just fine. SHould have known about this years ago. Thanks again. Capt Neil Faulkner Sorry, only registered users may post in this forum.
|