SPONSORS
2024 ICRBE EXPO |
Minima Guide Set Up on Spinning Rods
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: September 21, 2012 02:14PM
Wondering what you guys are using for running guides on spinning rods with Minima's. I have been back and forth between XSVXG06 spinning style frame, and the XF4XG06 fly style frame.
For the butt guide I almost always use the M style, and SV style for transition guides. Rigt now I am looking at spinning rods to be used with light (4-8#) mono to be specific. Any thoughts appreciated. Thanks - Marc Keep it simple - that's all I can handle! Edited 1 time(s). Last edit at 09/21/2012 02:15PM by Marc Morrone. Re: Minima Guide Set Up on Spinning Rods
Posted by:
Tom Kirkman
(Moderator)
Date: September 21, 2012 02:15PM
I use the low frame fly type.
............. Re: Minima Guide Set Up on Spinning Rods
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: September 21, 2012 03:29PM
Thanks Tom - I know you use these guides and was hoping for your input. Thanks - Marc Keep it simple - that's all I can handle! Re: Minima Guide Set Up on Spinning Rods
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: September 21, 2012 04:13PM
One - other question - do you usually run the Chrome finish or TiCH finish M4's?
Thanks, Marc Re: Minima Guide Set Up on Spinning Rods
Posted by:
Tom Kirkman
(Moderator)
Date: September 21, 2012 04:14PM
Chrome. Not that it makes any practical difference.
............ Re: Minima Guide Set Up on Spinning Rods
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: September 21, 2012 11:13PM
I've used quite a few of the size #4 micro guides with excellent results, but that shouldn't be a surprise as I've used the #4 M guides for many years. Have some of the new #3s, but haven't used them yet. Re: Minima Guide Set Up on Spinning Rods
Posted by:
john backos
(---.nwrknj.fios.verizon.net)
Date: September 22, 2012 12:00AM
I just finished a spinnerbuilt on a 12wt. fly rod with a fuji sk seat. I used a 20, 10 then 4s out to an m type tip. Re: Minima Guide Set Up on Spinning Rods
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: September 23, 2012 03:48AM
For light (1/32 to 1/4 oz) spin rod hard to beat the Match frame in 16/8/5 for transition then Fly frame size 3 to tip. Re: Minima Guide Set Up on Spinning Rods
Posted by:
Brook Oliva
(---.se.biz.rr.com)
Date: September 24, 2012 12:16PM
Marc,
I've used the Tich frames on a few rods that I fish saltwater exclusively and have not had any issues with the plating if that's what you are concerned with. Also I have a few set ups similar to what you mention, and i have been running either 4's or 5's in the fly frame. Clearance really isn't an issue with these guides so I have not had any issue using smaller sizes. Kind Regards, Brook Oliva Mud Hole Custom Tackle, Inc. brook@mudhole.com (866)-790-RODS Sorry, only registered users may post in this forum.
|