SPONSORS
2024 ICRBE EXPO |
identity
Posted by:
gaston arnold
(---.war.clearwire-wmx.net)
Date: September 21, 2012 02:23PM
I was given a blank I am going to use as my first rod building attempt but I'm not sure what "kind" of rod it is here are the numbers on it.....Lamiglas sw 924 m. Any help would be appreciated Re: identity
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 21, 2012 04:32PM
The owner or who ever gave you the blank has to know some thing about it
Ask him Too many questions to list here freshwater Salt Fish - line - lure - bla - bla maybe some one has a catalog to find out what it is used for I did some searching but could not find any thing Bill - willierods.com Edited 1 time(s). Last edit at 09/21/2012 04:39PM by bill boettcher. Re: identity
Posted by:
Tom Kirkman
(Moderator)
Date: September 21, 2012 04:54PM
Check the Lamiglas website for more information. If that blank is no longer listed, a quick email to them should result in an answer.
Their link is to the left in the sponsor column. ............... Re: identity
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: September 22, 2012 12:27AM
Back in the late 70's the Lamiglas blank catalogs had designations as you discribe. Sorry I no longer have those catalogs. Re: identity
Posted by:
gaston arnold
(---.war.clearwire-wmx.net)
Date: September 22, 2012 12:34AM
I figure its pretty old.he was given it by some steelhead fishing friends but he started fly fishing and its been stored indoors ever since Re: identity
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 22, 2012 08:29AM
If you can find a builder that has the CCS set up it can be measured to figure out what the possible line and lure weight and power of the blank
Or You can tape some guides on the blank and go outside Cast several weighted lures and see what it can handle You can measure the butt OD and tip and look around to see what may be similar But it being so old ??? Bill - willierods.com Re: identity
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: September 22, 2012 11:16AM
Might take a bunch of pennies to measure this medium power saltwater blank. Had to measure a few Batson SW blanks for a customer, everything started at $5.00+. Sorry, only registered users may post in this forum.
|