SPONSORS
2024 ICRBE EXPO |
Tips for using Lumiseal
Posted by:
David McDonough
(---.washdc.fios.verizon.net)
Date: September 06, 2012 02:30AM
After years of using Flex Coat I recently thought I'd give Lumiseal a try. I have found it stringy and globby and the results have been uneven and unattractive compared to Flex Coat.
1) Does anyone have any tips on getting best results? 2) I'm guessing that Permagloss is basically the same stuff with a different label. Is there a significant difference? Re: Tips for using Lumiseal
Posted by:
Tom Kirkman
(Moderator)
Date: September 06, 2012 07:28AM
Lumiseal contains the same base product as PermaGloss, but that's about it. PG has additional solvents that make it thinner, among other things.
Moisture curing urethanes should not be expected to act like, nor look like, epoxy. There have been many posts here in the past decade about how to use them to best advantage. If you'll do a search you should uncover many tips that'll help you out with these type products. ................. Sorry, only registered users may post in this forum.
|