SPONSORS
2024 ICRBE EXPO |
Repair eva deformation
Posted by:
Jeff Leonard
(---.lightspeed.caryil.sbcglobal.net)
Date: July 16, 2012 05:19PM
I recently clamped up a handle I was gluing up with a eva butt cap and the butt cap has a little deformed indentation in it. Is there a way to get this slight deformation out or do I have to cut it off and get a new one?
Thanks, Jeff Leonard Muskyfsh Re: Repair eva deformation
Posted by:
wayne diduch
(---.cpe.net.cable.rogers.com)
Date: July 16, 2012 06:48PM
Jeff...Boil water in the Kettle, pour Boiling water on a wash / terry cloth, hold the dry portion of the cloth and apply the wet Towel to the dent...it usually works the first time to pop the dent out...You may have to repeat it...but it works..trust me...i have have done it numerous times. i run into this at times the from the rollers on my Rodsmith wrapper,despite the very light tension from the rollers...Oh...works on Cork too...hope this helps..Cheers!! Re: Repair eva deformation
Posted by:
Steve Mcleod
(---.151.112.82.dyn.jtglobal.com)
Date: July 16, 2012 07:41PM
Works great, got a dent out of a grip the other day like wayne said by pouring boiling water over the affected area. Jersey, Channel Islands. (U.K.) Edited 1 time(s). Last edit at 07/16/2012 07:44PM by Steve Mcleod. Re: Repair eva deformation
Posted by:
Jeff Leonard
(---.lightspeed.caryil.sbcglobal.net)
Date: July 16, 2012 09:25PM
Thanks Wayne I will keep that in mind, what I did was heat it slightly with a heat gun and kneaded it with my fingers. Dent is gone . Thanks. Keep me on your facebook.
Jeff Leonard Muskyfsh Re: Repair eva deformation
Posted by:
Jeff Leonard
(---.lightspeed.caryil.sbcglobal.net)
Date: July 16, 2012 09:33PM
Thanks for your help Steve, appreciate the response. Best of fishing always. I will post pics of this build when done.
Sincerely, Jeff Leonard Muskyfsh Re: Repair eva deformation
Posted by:
wayne diduch
(---.cpe.net.cable.rogers.com)
Date: July 16, 2012 09:54PM
Jeff...Most Welcome...and will most certainly keep you on my Friends list..Cheers Pal!!!... Sorry, only registered users may post in this forum.
|