I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto Topic: Previous•Next
Goto: Forum List•Message List•New Topic•Search•Log In Or Register•Print View
CCS Data
Posted by: Bob Riggins (---.se.biz.rr.com)
Date: June 04, 2012 09:23AM

Does anyone have access to the CCS data that was on the CCS Data site. That was a lot of good information and I used it extensively when designing builds. Now it seems to be gone.

Options: Reply•Quote
Re: CCS Data
Posted by: Terry Turner (---.hsd1.or.comcast.net)
Date: June 04, 2012 10:09AM

The link to the data site from the CCS page has a malware warning. I did not proceed to the data site because of this, but there is a link to the data site from the CCS info page on the left. Proceed at your own risk. I'm not sure who is maintaining this but looks like it needs some virus intervention.

Terry

Options: Reply•Quote
Re: CCS Data
Posted by: Greg LaPolla (---.dsl.irvnca.pacbell.net)
Date: June 04, 2012 09:14PM

If you unblock youer email address I can email you the excel spreadsheet.

Greg

Options: Reply•Quote
Re: CCS Data
Posted by: Ray Mazza (---.syrcny.east.verizon.net)
Date: June 05, 2012 09:13AM

Would you please email it to me as well? Thank you very much.
Ray Mazz
midstreamrods@yahoo.com

Options: Reply•Quote
Re: CCS Data
Posted by: Ron Jack (---.ngn.east.myfairpoint.net)
Date: June 05, 2012 09:20AM

Greg, Could you e mail me a copy also.

Thank you,

Options: Reply•Quote
Re: CCS Data
Posted by: Bob Riggins (---.se.biz.rr.com)
Date: June 05, 2012 10:34AM

E-mail is unblocked. Thanks.

It would be nice is someone stepped forward and maintained the CCS data site. It is an invaluable resource. Unfortunately, I don't have the expertise or time to do it.

Options: Reply•Quote
Re: CCS Data
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: June 06, 2012 09:21AM

I have been searching for on-line info for the URRS (casting and spinning version of the CCS) for DAYS and short of the single back issue of Rodmaker where the article originally appeared I can find very little. We need a step-by-step on the ERN, TP, and PR of a given spinning or casting blank (or rod). Anyone know if this exists???

Options: Reply•Quote
Re: CCS Data
Posted by: Tom Kirkman (Moderator)
Date: June 06, 2012 09:51AM

It's the same for any type blank, fly, casting or spinning. A blank is a blank.

.............

Options: Reply•Quote
Re: CCS Data
Posted by: Bob Riggins (---.se.biz.rr.com)
Date: June 06, 2012 02:29PM

I just tried the link to the data page and it seems to be working. Go to the CCS information page and there is a link on the lower left hand side of the page that says CCS Data. This link seem to work. It also includes some spinning and casting rod data.

Options: Reply•Quote


Goto: Forum List•Message List•Search•Log In Or Register
Sorry, only registered users may post in this forum.
Click here to login
Webmaster