SPONSORS
2024 ICRBE EXPO |
Incra Rules
Posted by:
David Gilberg
(---.pghk.east.verizon.net)
Date: June 01, 2012 11:20AM
This is a great ruler for making accurate layout marks for decorative wraps.
It's the 12" Centering Incra Rule. It's a very thin stainless steel ruler 12" X 1 1/4". Both edges are marked in 1/32 increments with tiny holes at each spot. A .5mm technical pencil point fits perfectly in the holes. Rotate the point in the holes and you get perfectly aligned dots. I use an under wrap which provides a good base for the layout marks. They have many models but I like the 12" Centering Rule best. The centering feature is ideal for laying out guide wraps. I plan to get the 18" model next for longer wraps. Re: Incra Rules
Posted by:
Don O'Neil
(---.dhcp.asfd.ct.charter.com)
Date: June 01, 2012 01:23PM
Great find!!!! I will have one soon.
Don Re: Incra Rules
Posted by:
Harry Bell
(---.static.klmz.mi.charter.com)
Date: June 01, 2012 07:17PM
Who carries it? Re: Incra Rules
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: June 01, 2012 07:32PM
Spend 14 seconds and google search it Re: Incra Rules
Posted by:
David Gilberg
(---.pghk.east.verizon.net)
Date: June 02, 2012 12:18AM
I found them on them on Amazon. Re: Incra Rules
Posted by:
Don O'Neil
(---.dhcp.asfd.ct.charter.com)
Date: June 02, 2012 09:37AM
Check the Incra web sight for dealers. I had to search the dealers links a bit to find one that had a metric rule in stock.
Don Sorry, only registered users may post in this forum.
|