Incra Rules

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Incra Rules

Posted by: David Gilberg (---.pghk.east.verizon.net)

Date: June 01, 2012 11:20AM

This is a great ruler for making accurate layout marks for decorative wraps.

It's the 12" Centering Incra Rule.

It's a very thin stainless steel ruler 12" X 1 1/4".

Both edges are marked in 1/32 increments with tiny holes at each spot.

A .5mm technical pencil point fits perfectly in the holes. Rotate the point in the holes and you get perfectly aligned dots.

I use an under wrap which provides a good base for the layout marks.

They have many models but I like the 12" Centering Rule best.

The centering feature is ideal for laying out guide wraps.

I plan to get the 18" model next for longer wraps.

Options: Reply•Quote