SPONSORS
2024 ICRBE EXPO |
Fishing rod help-moved to Sequim WA.
Posted by:
. Douglas Webb
(---.sub-75-228-184.myvzw.com)
Date: May 04, 2012 01:31PM
I have been absent for a while. We moved from Montana to Sequim Washington so my wife and I could help her folks some. I am getting a shop added to the house we bought and will finally have an area I can set up and post a sign "Cigar Country".
Any builders from that area, I would appriciate your input as to the couple of salt water rods I should build for my self. I lived in Alaska for a long time and fished Halibut, Cod (jigging), All my salmon fishing was in rivers. I mainly fish fly rods for trout for the past 8 yrs. Any suggestions are welcome and would be interesting to me. I bought a boat from a friend and can't wait to get back to some saltwater fishing. I will also be able to go see Batson's facility, I hope, as well as going to meet the people at Utmost Enterprises!!! Hope to also meet some builders from that area. ANY THING i GET BACK WILL AT LEAST BE FUN TO THINK ABOUT AND MAYBE BUILD.... Doug Webb Edited 1 time(s). Last edit at 05/05/2012 09:00AM by Douglas Webb. Re: Fishing rod help-moved to Sequim WA.
Posted by:
John Britt
(---.res.bhn.net)
Date: May 04, 2012 01:45PM
Doug you are in a great position take a ride into town and visit Anglers Workshop directly opposite the Lamiglass factory, great people to deal with
John Re: Fishing rod help-moved to Sequim WA.
Posted by:
. Douglas Webb
(---.sub-75-228-184.myvzw.com)
Date: May 04, 2012 01:59PM
Thanks John, I have had an account with Angler's Workshop for years and will make the trip to Woodland in the not to distant future. Re: Fishing rod help-moved to Sequim WA.
Posted by:
Jon Bial
(173.240.245.---)
Date: May 04, 2012 04:48PM
If you're going to make the 4 plus hour drive to Woodland from Sequim, feel free to arrange a trip to see us.
If I moved to Sequim, I'd call Karry at Batson for a fishing report before my boxes were unpacked! Jon North Fork Composites LLC Re: Fishing rod help-moved to Sequim WA.
Posted by:
Jon Bial
(173.240.245.---)
Date: May 04, 2012 04:48PM
If you're going to make the 4 plus hour drive to Woodland from Sequim, feel free to arrange a trip to see us.
If I moved to Sequim, I'd call Karry at Batson for a fishing report before my boxes were unpacked! Jon North Fork Composites LLC Re: Fishing rod help-moved to Sequim WA.
Posted by:
Karry Batson
(---.wavecable.com)
Date: May 04, 2012 06:59PM
Ling Cod fishing.
Rainshadow Live Bait Spiral Wrap Component Part Number Part Description Rod Blank Model # RCLB79ML 7' 9" 1pc 20-40# 2-6oz Med/Lt Butt Cap: AF2B 2" Alum Fighting Butt- Black Satin Butt Cap trim: TRC-B for butt cap trim Trim Ring mount inbetween AF2 and WHTS… Rear Grip: WHTS-12+WHKA X 5 12" Woven Texalium Silver Handle (1.05" OD / .970" ID) and Woven Handle Arbors Rear Grip Cover: HST-1.18x39.4 cut 4 inch X 2 Heat Shrink Tube X-Flock 1.18" IDx39.4"-Black Reel Seat: AT17-S Graphite Trigger Blank Exposed w/cush R/S - Silver Reel Seat Trim: TRS17-S Fore Grip: BSF6-500 6" Foregrip .500" I.D. EVA-Black Fore Grip Cover: HST-1.18x39.4 Heat Shrink Tube X-Flock 1.18" IDx39.4"-Black Winding Check: AWCCO-592-S Aluminum Winding Check w/cut out I.D. - Silver Hookeeper: XHKS Small Silver Hook Keeper Tip Top XPPZT08R07.5 Alsp SS316-Chrome 'PP' Top 06 'Z' FLANGED Rg 7.5 Tube Guides (see below for size and quantity) XMXNZG ALPS SS316 Med XN Guide w/'Z' ring-Polished Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XMXNZG08 3.5" 180 2nd XMXNZG08 7.125" 180 3rd XMXNZG08 10.875" 180 4th XMXNZG08 14.75" 180 5th XMXNZG08 18.75" 180 6th XMXNZG08 24.25" 180 7th XMXNZG08 30.125" 180 8th XMXNZG08 36.375" 170 degrees to the right 9th XMXNZG10 42.625" 130 Degrees to the right 10th XMXNZG10 49.75 70 degrees to the right 11th XMXNZG20 57.5" 15 degrees right Down riger fishing BP1266F Rainshadow Salmon Steelhead Component Part Number Part Description Rod Blank Model # BP1266F 10'6" 2pc HVY 12-30 Salmon/Steelhead Butt Cap: AF2-SG 2" Alum Fighting Butt-Shiny Gunsmoke Butt Cap trim: TRC-S Trim Ring for Casting Seats size 16/17/18-Silver Reel Seat: AT16-S Aluminum Trigger R/S w/Cushion-Silver Fore Grip: BF5-500 5" Foregrip Grade 'A' .400" ID Fore Grip Cover: HST1.18 shrink tube Heat Shrink Tube X-Flock 1.18" IDx39.4"-Black Rear Grip: WHTS-12 12" Woven Texalium Silver Handle (1.05" OD / .970" ID) Rear Grip arbors WHKA x 5 + WBEC Arbors for woven handle Winding Check: AWCCO531-S Aluminum Winding Check w/cut out .542 I.D. - Silver Hookeeper: XDSHKSS-S SS316 Drop Shot Hook Keeper Stainless Steel-Polished Tip Top XPZT07F06.0 SS316-'P' Top Flanged 07 'H' Z ring 5.5 tube - Chrome Guides (see below for size and quantity) XMXNZG ALPS SS316 Med XN Guide w/'Z' ring-Polished Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XMXNZG07 3 1/2" 2nd XMXNZG07 7 1/4" 3rd XMXNZG07 11" 4th XMXNZG07 14 7/8" 5th XMXNZG07 19" 6th XMXNZG07 23 1/8" 7th XMXNZG07 27 3/8" 8th XMXNZG07 31 3/4" 9th XMXNZG08 36 1/4" 10th XMXNZG08 40 7/8" 11th XMXNZG08 45 7/8" 12th XMXNZG08 51" 13th XMXNZG08 56 1/2" 14th XMXNZG08 62 1/2" 15th XMXNZG08 or 10 68 3/8" 16th XMXNZG08 or 10 74 1/2" 17th XMXNZG08 or 12 81 3/8" 18th XMXNZG16 88 1/2" Halibut SWB80XH Halibut Drifting rod Fotecast E Glass Saltwater Live Bait Component Part Number Part Description Rod Blank Model # SWB80XH-GB cut 4 iches off butt 7'9" with Tip top 1 pc Med 20-50# Butt Cap: BC25 #25 Med Butt Cap Rear Grip: WHTS12 or 10" 12" Woven Texalium Silver Handle (1.05" OD / .970" ID) Rear Grip Cover: HST-1.18 5 inches behind seat Heat Shrink Tube (DIA 30) X-Flock 1.18" IDx39.4"-Black Reel Seat: CAH24LX-WTS-S Reel Seat Light Alum w/cushion Silver w/Texalium Silver Insert Fore Grip: BSF16-625/750 16" Foregrip Rear OD: 1.43" Tapered ID: .625"- .750" EVA-Black Fore Grip Cover: HST-1.57X39.4-B Heat Shrink Tube ( DIA 40) X-Flock 1.57" IDx39.4"-Black Winding Check: BH11 Hosel .688" I.D. Tip Top AANS15.0 silver All American @#$%& Roller Top 15.0 Silver Guides (see below for size and quantity) XMXNZG10 ALPS SS316 Med XN Guide w/'Z' ring-Polished Guides (see below for size and quantity) XXNZG10 SS316- XN guide with Z ring-Polished frame Guides (see below for size and quantity) MSRXSG05LW Roller Gde SS316 Roller 4 Ball Sealed Bearing w/6061 alum frame Low Profile-Matte Silver Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XMXNZG10 4" 6 oclock 2nd XMXNZG10 8.125" 6 oclock 3rd XXNZG10 12.125" 6 oclock 4th XXNZG10 16.375" 6 oclock 5th XXNZG10 20.875" 6 oclock 6th XXNZG10 25.625" 5:30 oclock 7th XXNZG10 30.625" 4:45 oclock 8th XXNZG10 35.625" 3:15 oclock 9th XXNZG16 41" 1:30 oclock 10th MSRXSG05LW 50.750" Noon Inshore Rock Fish XBB964 Spiral Wrap Rainshadow RX8 Back Bounce/Jig/swim bait 3/4-1.5 ounce Component Part Number Part Description Rod Blank Model # XBB964-TC 8' 1pc. 12-25 Back Bouncing-Titanium Chrome Butt Cap: EVABC20 EVA Butt Cap 19.8 mm Rear Grip: WHTS-12 12" Woven Texalium Silver Handle (1.05" OD / .970" ID) Rear Grip Cover: Not necessary HST1.18 x 39.4-B Heat Shrink Tube X-Flock 1.18" IDx39.4"-Black Rear Grip Shims: WBBC+WBEC+WHKA x 4 Woven Bushing Butt Cap+Woven Bushing End Cap+Woven Handle Kit Arbor Reel Seat : AT16-S Aluminum Trigger R/S w/o Cushion-Silver Fore Grip: BF5-375 Will need to ream to fit 5" Foregrip .375" I.D. EVA-Black Fore Grip cover: Not necessary HST1.18 x 39.4-B Heat Shrink Tube X-Flock 1.18" IDx39.4"-Black Reel Seat Trim Ring: TRS16-S Trim Ring for Spin Seat size 16 Silver Winding Check: AWCCO443-S Aluminum Winding Check w/cut out .443 I.D. - Silver Hookeeper: XHKS-S SS316 Hook Keeper Small-Polished Tip Top: XPZT06F06.0 SS316-Chrome 'P' Top 06 'Z' FLANGED Rg 6.0 Tube Guides (see below for size and quantity) XLXNZG ALPS SS316-Light XN with polished Zirconium Ring RRD Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XMXNZG06 3" 180 degree 2nd XMXNZG06 6.5" 180 degree 3rd XMXNZG06 10.5" 180 degree 4th XMXNZG06 15" 180 degree 5th XMXNZG06 19.625" 180 degree 6th XMXNZG06 25.625" 180 degree 7th XMXNZG06 32" 180 degree 8th XMXNZG06 38.375" 170 degree 9th XMXNZG06 45.375" 160 degree 10th XMXNZG06 51.375" 90 degree 11th XMXNZG12 58" 20 degree Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Fishing rod help-moved to Sequim WA.
Posted by:
Karry Batson
(---.wavecable.com)
Date: May 04, 2012 07:03PM
I have been slaying Dragons aka Ling Cod in the Pacific and going to drag for some Halibut in the afternoon :) Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Fishing rod help-moved to Sequim WA.
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: May 04, 2012 07:19PM
You have Batson and Pacific Bay both in your area to visit and Utmost Ent. to buy from. Saves some time and gas from an Angler's run. Re: Fishing rod help-moved to Sequim WA.
Posted by:
Drew Pollock
(---.100-30-64.ftth.swbr.surewest.net)
Date: May 04, 2012 11:28PM
Awesome. What a great reply from Karry.
No wonder I like my Batson builds so much. Re: Fishing rod help-moved to Sequim WA.
Posted by:
. Douglas Webb
(---.sub-75-228-138.myvzw.com)
Date: May 05, 2012 08:52AM
Karry, Thanks so much for the wonderful information. As soon as my shop is finished I will do that thing we often don't have time for-Build myself some rods-. I printed this page out and again thank you for your time and the sharing of this information which will save me from the usual trial and error of moveing to new waters and figuring it out from scratch. Can't say enough about all the info you gave me, took all the guess work out of these builds!!!!!!! Doug Webb Re: Fishing rod help-moved to Sequim WA.
Posted by:
Mick Batson
(---.wavecable.com)
Date: May 06, 2012 11:03AM
First - welcome to Sequim. The local saying is "I may not have been born here, but I got here as fast as I could!" Come on over to Fisherman's Outlet (Utmost Enterprises). We are in the store Monday through Friday from 9 to 5 and can open the store on weekends by appointment. Being centrally located smack dab in between both Batson's and Pac Bay, we are able to offer all of the products from both companies. We also have closeout blanks that are not listed on the website and tackle for local fisherman. We can work up a quote based on Karry's recipes if you want to give you an idea of what you would be looking at price wise. Give us a call if you need directions (800) 588-6678 or send an email to utmost39@aol.com if you have any questions. We check emails all weekend. Re: Fishing rod help-moved to Sequim WA.
Posted by:
. Douglas Webb
(---.sub-75-228-129.myvzw.com)
Date: May 06, 2012 03:23PM
Thanks Mick. I get home from work in Wyoming on May 21 and will be hauling my boat over with me to it's new home!!! I have an account with you guys and look forward to meeting you. My wife and I plan to be out fishing by Thursday the 24th. I will be home for three weeks and will contact you to get one of those setups going. I will write an e-mail soon to get it put together and get one built. I am very excited to get back to some salt water fishing. I love fly fishing for trout but have missed the salt water since we retired out of alaska in 03. I very much look forward to building some salt water rods as most of what I did in Montana was fly rods and light spinning. Can't wait to be able to work on larger diamiter rods where you can do more thread work. Thanks for the response, see you in a couple of weeks. Doug Webb Sorry, only registered users may post in this forum.
|